Drinking-water contaminant
2,3,7,8-TCDD in drinking water
2,3,7,8-TCDD (SDWIS code 2063) has a federal limit of 0.00000003 mg/L, as EPA records it on violations. In the 10 years to the 2026 third-quarter report, EPA records no health-based violation for it, and 2,527 monitoring, reporting or notice violations. (EPA SDWA data, October 14, 2026.)
Check this record at EPA: EPA National Primary Drinking Water Regulations
0mg/Llimit recorded on violations
0health-based violations, 10 years
0systems with one
0violations open now
How does 2,3,7,8-TCDD compare with other drinking-water contaminants?
EPA records 2,527 violations for 2,3,7,8-TCDD since October 2016, none health-based: they are monitoring, reporting or notice violations.
Source: Computed by PlainEnviro from SDWIS quarter 2026Q3 and the UCMR 5 final occurrence data.
What is the federal limit for 2,3,7,8-TCDD in drinking water?
EPA's violation records for 2,3,7,8-TCDD carry the federal limit as "0.00000003 mg/L".
EPA's health goal (MCLG) for 2,3,7,8-TCDD is zero, the level at which no known or anticipated health effect occurs. Potential health effects from long-term exposure above the limit, in EPA's words: Reproductive difficulties; increased risk of cancer. Common sources in drinking water: Emissions from waste incineration and other combustion; discharge from chemical factories.
Source: 40 CFR part 141 (National Primary Drinking Water Regulations), as cited; EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; EPA, National Primary Drinking Water Regulations table (MCLG, health effects, sources), read 2026-11-11.
How many water systems violated the 2,3,7,8-TCDD rules in 10 years?
Since October 1, 2016, EPA records 2,527 violations for 2,3,7,8-TCDD at 1,108 water systems: 2,527 monitoring and reporting.
Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; Health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.
What do these records show, and what not?
States report each public water system's violations to EPA, which publishes them quarterly. A violation is a compliance record, not a test of the water in your tap; your utility's annual water quality report (the Consumer Confidence Report) and a certified laboratory answer that. Counts here are violations with a compliance period beginning on or after October 1, 2016. How the data is checked
Sources: the EPA files behind this page
- EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
- EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
- EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
- EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
- EPA: find your local Consumer Confidence Report: www.epa.gov