Drinking-water contaminant
2,4-D in drinking water
2,4-D (SDWIS code 2105) has a federal limit of 0.07 mg/L, as EPA records it on violations. In the 10 years to the 2026 third-quarter report, EPA records no health-based violation for it, and 6,489 monitoring, reporting or notice violations; 1 violation at 1 system is still open. (EPA SDWA data, October 14, 2026.)
Check this record at EPA: EPA National Primary Drinking Water Regulations
0.07mg/Llimit recorded on violations
0health-based violations, 10 years
0systems with one
1violation open now
How does 2,4-D compare with other drinking-water contaminants?
EPA records 6,489 violations for 2,4-D since October 2016, none health-based: they are monitoring, reporting or notice violations.
Source: Computed by PlainEnviro from SDWIS quarter 2026Q3 and the UCMR 5 final occurrence data.
What is the federal limit for 2,4-D in drinking water?
EPA's violation records for 2,4-D carry the federal limit as "0.07 mg/L".
EPA's health goal (MCLG) for 2,4-D is 0.07 mg/L, the level at which no known or anticipated health effect occurs. Potential health effects from long-term exposure above the limit, in EPA's words: Kidney, liver, or adrenal gland problems. Common sources in drinking water: Runoff from herbicide used on row crops.
Source: 40 CFR part 141 (National Primary Drinking Water Regulations), as cited; EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; EPA, National Primary Drinking Water Regulations table (MCLG, health effects, sources), read 2026-11-11.
How many water systems violated the 2,4-D rules in 10 years?
Since October 1, 2016, EPA records 6,489 violations for 2,4-D at 3,424 water systems: 6,489 monitoring and reporting.
Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; Health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.
Which water systems have an open 2,4-D violation now?
1 violation for 2,4-D at 1 system is open in the 2026Q3 data (not yet returned to compliance or resolved); 0 of them health-based.
| Water system | PWSID | State | People served | Open | Health-based | Earliest period |
|---|---|---|---|---|---|---|
| Hampton Homes Home Owners Assn | ID4010071 | ID | 0 | 1 | 0 | 2026-01-01 |
Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026.
Do industrial facilities release 2,4-D?
Facilities also report releases of this substance to the Toxics Release Inventory: 2,4-D. A release to air, water or land is not a measurement of any water system's supply.
What do these records show, and what not?
States report each public water system's violations to EPA, which publishes them quarterly. A violation is a compliance record, not a test of the water in your tap; your utility's annual water quality report (the Consumer Confidence Report) and a certified laboratory answer that. Counts here are violations with a compliance period beginning on or after October 1, 2016. How the data is checked
Sources: the EPA files behind this page
- EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
- EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
- EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
- EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
- EPA: find your local Consumer Confidence Report: www.epa.gov