Drinking-water contaminant
Di(2-ethylhexyl) adipate in drinking water
Di(2-ethylhexyl) adipate (SDWIS code 2035) has a federal limit of 0.4 mg/L, as EPA records it on violations. In the 10 years to the 2026 third-quarter report, EPA records no health-based violation for it, and 6,551 monitoring, reporting or notice violations; 1 violation at 1 system is still open. (EPA SDWA data, October 14, 2026.)
Check this record at EPA: EPA National Primary Drinking Water Regulations
0.4mg/Llimit recorded on violations
0health-based violations, 10 years
0systems with one
1violation open now
How does Di(2-ethylhexyl) adipate compare with other drinking-water contaminants?
EPA records 6,551 violations for Di(2-ethylhexyl) adipate since October 2016, none health-based: they are monitoring, reporting or notice violations.
Source: Computed by PlainEnviro from SDWIS quarter 2026Q3 and the UCMR 5 final occurrence data.
What is the federal limit for Di(2-ethylhexyl) adipate in drinking water?
EPA's violation records for Di(2-ethylhexyl) adipate carry the federal limit as "0.4 mg/L".
EPA's health goal (MCLG) for Di(2-ethylhexyl) adipate is 0.4 mg/L, the level at which no known or anticipated health effect occurs. Potential health effects from long-term exposure above the limit, in EPA's words: Weight loss, liver problems, or possible reproductive difficulties. Common sources in drinking water: Discharge from chemical factories.
Source: 40 CFR part 141 (National Primary Drinking Water Regulations), as cited; EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; EPA, National Primary Drinking Water Regulations table (MCLG, health effects, sources), read 2026-11-11.
How many water systems violated the Di(2-ethylhexyl) adipate rules in 10 years?
Since October 1, 2016, EPA records 6,551 violations for Di(2-ethylhexyl) adipate at 3,407 water systems: 6,550 monitoring and reporting and 1 other (public notice, consumer report).
Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; Health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.
Which water systems have an open Di(2-ethylhexyl) adipate violation now?
1 violation for Di(2-ethylhexyl) adipate at 1 system is open in the 2026Q3 data (not yet returned to compliance or resolved); 0 of them health-based.
| Water system | PWSID | State | People served | Open | Health-based | Earliest period |
|---|---|---|---|---|---|---|
| Hampton Homes Home Owners Assn | ID4010071 | ID | 0 | 1 | 0 | 2026-01-01 |
Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026.
What do these records show, and what not?
States report each public water system's violations to EPA, which publishes them quarterly. A violation is a compliance record, not a test of the water in your tap; your utility's annual water quality report (the Consumer Confidence Report) and a certified laboratory answer that. Counts here are violations with a compliance period beginning on or after October 1, 2016. How the data is checked
Sources: the EPA files behind this page
- EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
- EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
- EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
- EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
- EPA: find your local Consumer Confidence Report: www.epa.gov