PlainEnviro

Drinking-water contaminant

Heptachlor epoxide in drinking water

Heptachlor epoxide (SDWIS code 2067) has a federal limit of 0.0002 mg/L, as EPA records it on violations. In the 10 years to the 2026 third-quarter report, EPA records no health-based violation for it, and 6,734 monitoring, reporting or notice violations; 1 violation at 1 system is still open. (EPA SDWA data, October 14, 2026.)

Check this record at EPA: EPA National Primary Drinking Water Regulations

0mg/Llimit recorded on violations

0health-based violations, 10 years

0systems with one

1violation open now

How does heptachlor epoxide compare with other drinking-water contaminants?

EPA records 6,734 violations for heptachlor epoxide since October 2016, none health-based: they are monitoring, reporting or notice violations.

Source: Computed by PlainEnviro from SDWIS quarter 2026Q3 and the UCMR 5 final occurrence data.

What is the federal limit for heptachlor epoxide in drinking water?

EPA's violation records for heptachlor epoxide carry the federal limit as "0.0002 mg/L".

EPA's health goal (MCLG) for heptachlor epoxide is zero, the level at which no known or anticipated health effect occurs. Potential health effects from long-term exposure above the limit, in EPA's words: Liver damage; increased risk of cancer. Common sources in drinking water: Breakdown of heptachlor.

Every federal drinking-water limit

Source: 40 CFR part 141 (National Primary Drinking Water Regulations), as cited; EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; EPA, National Primary Drinking Water Regulations table (MCLG, health effects, sources), read 2026-11-11.

How many water systems violated the heptachlor epoxide rules in 10 years?

Since October 1, 2016, EPA records 6,734 violations for heptachlor epoxide at 3,506 water systems: 6,733 monitoring and reporting and 1 other (public notice, consumer report).

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; Health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.

Which water systems have an open heptachlor epoxide violation now?

1 violation for heptachlor epoxide at 1 system is open in the 2026Q3 data (not yet returned to compliance or resolved); 0 of them health-based.

Systems with an open heptachlor epoxide violation, largest first
Water systemPWSIDStatePeople servedOpenHealth-basedEarliest period
Hampton Homes Home Owners AssnID4010071ID0102026-01-01

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026.

What do these records show, and what not?

States report each public water system's violations to EPA, which publishes them quarterly. A violation is a compliance record, not a test of the water in your tap; your utility's annual water quality report (the Consumer Confidence Report) and a certified laboratory answer that. Counts here are violations with a compliance period beginning on or after October 1, 2016. How the data is checked

Sources: the EPA files behind this page
  • EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
  • EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
  • EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
  • EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
  • EPA: find your local Consumer Confidence Report: www.epa.gov