Drinking-water contaminant · UCMR 5
1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) in drinking water
1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) (SDWIS code 2821) has no federal limit in EPA's drinking-water records. In the 10 years to the 2026 third-quarter report, EPA records no health-based violation for it. In UCMR 5, EPA tested 10,307 systems for it; 3 detected it. (EPA SDWA data, October 14, 2026; UCMR 5.)
Check this record at EPA: EPA UCMR 5 occurrence data
0health-based violations, 10 years
0systems with one
0violations open now
3of 10,307 systems detected it (UCMR 5)
How does 1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) compare with other drinking-water contaminants?
In UCMR 5 it was detected at 0.0% of the 10,307 systems tested, 20th of 30 analytes by systems detecting.
Source: Computed by PlainEnviro from SDWIS quarter 2026Q3 and the UCMR 5 final occurrence data.
What is the federal limit for 1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) in drinking water?
EPA's drinking-water records carry no federal limit for 1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS). UCMR 5 measures contaminants EPA does not regulate yet, to decide whether it should.
Source: 40 CFR part 141 (National Primary Drinking Water Regulations), as cited; EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026.
How many water systems violated the 1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) rules in 10 years?
EPA records no violation for 1H, 1H, 2H, 2H-perfluorohexane sulfonic acid (4:2 FTS) with a compliance period beginning since October 1, 2016.
Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; Health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.
How much 4:2 FTS did EPA find in tap water systems?
EPA tested 10,307 public water systems for 4:2 FTS from 2023 to 2025. 3 (under 1%) detected it at or above the reporting level, systems serving 274,859 people.
| Water system | State | People served | Highest result | Samples detected |
|---|---|---|---|---|
| Emerald Coast Utilities Authority (ECUA) | FL | 242,172 | 7.6 | 1 of 54 |
| Sauk Village | IL | 9,921 | 3.2 | 1 of 4 |
| Canton Water Dept | MA | 22,766 | 3 | 1 of 8 |
UCMR 5 results show what was in the water when sampled; they are not compliance samples. PFAS results by state
Source: EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5), final occurrence data released August 2026 (file dated October 15, 2026); 1 ng/L = 0.001 µg/L.
What do these records show, and what not?
States report each public water system's violations to EPA, which publishes them quarterly. A violation is a compliance record, not a test of the water in your tap; your utility's annual water quality report (the Consumer Confidence Report) and a certified laboratory answer that. Counts here are violations with a compliance period beginning on or after October 1, 2016. How the data is checked
Sources: the EPA files behind this page
- EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
- EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
- EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
- EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
- EPA: find your local Consumer Confidence Report: www.epa.gov