PlainEnviro

Drinking-water contaminant

Picloram in drinking water

Picloram (SDWIS code 2040) has a federal limit of 0.5 mg/L, as EPA records it on violations. In the 10 years to the 2026 third-quarter report, EPA records no health-based violation for it, and 6,489 monitoring, reporting or notice violations; 1 violation at 1 system is still open. (EPA SDWA data, October 14, 2026.)

Check this record at EPA: EPA National Primary Drinking Water Regulations

0.5mg/Llimit recorded on violations

0health-based violations, 10 years

0systems with one

1violation open now

How does picloram compare with other drinking-water contaminants?

EPA records 6,489 violations for picloram since October 2016, none health-based: they are monitoring, reporting or notice violations.

Source: Computed by PlainEnviro from SDWIS quarter 2026Q3 and the UCMR 5 final occurrence data.

What is the federal limit for picloram in drinking water?

EPA's violation records for picloram carry the federal limit as "0.5 mg/L".

EPA's health goal (MCLG) for picloram is 0.5 mg/L, the level at which no known or anticipated health effect occurs. Potential health effects from long-term exposure above the limit, in EPA's words: Liver problems. Common sources in drinking water: Herbicide runoff.

Every federal drinking-water limit

Source: 40 CFR part 141 (National Primary Drinking Water Regulations), as cited; EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; EPA, National Primary Drinking Water Regulations table (MCLG, health effects, sources), read 2026-11-11.

How many water systems violated the picloram rules in 10 years?

Since October 1, 2016, EPA records 6,489 violations for picloram at 3,414 water systems: 6,489 monitoring and reporting.

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; Health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.

Which water systems have an open picloram violation now?

1 violation for picloram at 1 system is open in the 2026Q3 data (not yet returned to compliance or resolved); 0 of them health-based.

Systems with an open picloram violation, largest first
Water systemPWSIDStatePeople servedOpenHealth-basedEarliest period
Hampton Homes Home Owners AssnID4010071ID0102026-01-01

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026.

Do industrial facilities release picloram?

Facilities also report releases of this substance to the Toxics Release Inventory: Picloram. A release to air, water or land is not a measurement of any water system's supply.

What do these records show, and what not?

States report each public water system's violations to EPA, which publishes them quarterly. A violation is a compliance record, not a test of the water in your tap; your utility's annual water quality report (the Consumer Confidence Report) and a certified laboratory answer that. Counts here are violations with a compliance period beginning on or after October 1, 2016. How the data is checked

Sources: the EPA files behind this page
  • EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
  • EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
  • EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
  • EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
  • EPA: find your local Consumer Confidence Report: www.epa.gov