PlainEnviro

Non-transient non-community water system · Maryland

Sandymount Elementary drinking water

Sandymount Elementary (MD1060037) is a non-transient non-community water system in Maryland serving 650 people from groundwater. In the 10 years to the 2026 third-quarter report, EPA records no health-based violation and 2 monitoring, reporting or notice violations. Its latest lead 90th percentile (monitoring period beginning January 2019) was below the detection limit. (EPA SDWA data, October 14, 2026.)

Check this record at EPA: ECHO drinking water report for MD1060037

650people served

0health-based violations, 10 years

0violations still open

NDlead, 90th percentile: below detection (period from 2019)

Is the water from Sandymount Elementary safe to drink?

Sandymount Elementary had no health-based violation in the 10 years to October 2026: EPA records no time its water broke a limit or a required treatment step. Every violation since October 2016 is resolved or archived. Its full SDWIS record, older years included, holds 6 violations of every kind.

In Maryland, 33% of the 460 active community systems had a health-based violation in the same 10 years.

In its measured results, its latest lead 90th percentile (period beginning January 2019) was below the detection limit. It draws on groundwater for 650 people.

This is Sandymount Elementary's compliance record, not a test of the water at your tap: what the records cannot tell you, and who can.

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026. Confirm in EPA ECHO drinking water search.

What violations does EPA record for Sandymount Elementary?

EPA records 2 violations for Sandymount Elementary since October 2016: 1 monitoring and reporting and 1 monitoring.

Violations since October 2016, newest first
Contaminant or ruleKindCompliance periodStatus
Lead and Copper RuleMonitoring and reportingsince October 2021Resolved
Revised Total Coliform RuleMonitoringJanuary 2020 to March 2020Resolved

Source: SDWIS violations and enforcement, quarter 2026Q3; health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.

How much lead and copper is in Sandymount Elementary's tap samples?

Lead, 90th percentile of tap samples (period beginning January 2019)0.0 mg/L Below detection
Copper, 90th percentile (period beginning January 1996)3.53 mg/L Above the action level

Over the action level (Sandymount Elementary's result is a 90th percentile: what that is), a system must treat the water to make it less corrosive, tell the public and replace lead lines. The Lead and Copper Rule Improvements (in effect since December 30, 2024) lower the lead action level to 0.010 mg/L from November 1, 2027.

Source: SDWIS lead and copper sample summaries (90th percentiles), quarter 2026Q3; Lead and Copper Rule Improvements: Federal Register, published October 30, 2024, effective December 30, 2024; 40 CFR 141.80(a)(4)(i) keeps 0.015 mg/L until November 1, 2027 and 141.80(c)(1) sets 0.010 mg/L from then (eCFR); both read November 11, 2026.

Who does Sandymount Elementary serve, and where does its water come from?

Sandymount Elementary is a non-transient non-community water system; EPA's inventory lists its owner type as local government, on EPA's inventory since 1988.

Community systems publish an annual water quality report (Consumer Confidence Report); a school or workplace system reports to its own users; how to find yours (EPA).

Source: SDWIS water system inventory and geographic areas served, quarter 2026Q3.

What other environmental records are in Carroll County?

The TRI facilities in Carroll County that reported the most toxic releases:

  1. Heidelberg Materials US Cement LLC 10,336 pounds
  2. Evapco Inc-Taneytown 75 pounds
  3. Black & Decker (US) Inc 52 pounds
  4. Maryland Paving Inc under 1 pound
  5. Fuchs N.A. 0 pounds

A facility or site in the same county is not evidence that it affects this system's water; source-water protection is assessed by the state.

Source: EPA Toxics Release Inventory 2024 and EPA SEMS National Priorities List, as of October 28, 2026.

Sources: the EPA files behind this page
  • EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
  • EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
  • EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
  • EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
  • EPA: find your local Consumer Confidence Report: www.epa.gov
  • EPA Toxics Release Inventory basic data files, reporting years 2019-2024, reporting year 2024 processed November 5, 2025: www.epa.gov
  • EPA SEMS: all final, proposed and deleted NPL sites with dates, category and contaminants, report dated October 28, 2026: www.epa.gov