PlainEnviro

Drinking-water contaminant

Chlorobenzene in drinking water

Chlorobenzene (SDWIS code 2989) has a federal limit of 0.1 mg/L, as EPA records it on violations. In the 10 years to the 2026 third-quarter report, EPA records 6 health-based violations for it at 1 water system in 1 state, and 9,646 monitoring, reporting or notice violations; 1 violation at 1 system is still open. (EPA SDWA data, October 14, 2026.)

Check this record at EPA: EPA National Primary Drinking Water Regulations

0.1mg/Llimit recorded on violations

6health-based violations, 10 years

1system with one

1violation open now

How does chlorobenzene compare with other drinking-water contaminants?

Chlorobenzene ranked 51st of 60 contaminants by health-based violations since October 2016. The year with the most was 2024, when 3 health-based violations began; the 10 years averaged 1 a year. Health-based violations with a compliance period beginning in 2022-2025 numbered 6, against 0 in 2017-2020. Of the health-based violations, all 6 were results over the limit; the federal limit is 0.1 mg/L, a limit recorded on violations. The 1 system with one serve 25 people in all; 0 of them (0%) are community systems that serve homes, the rest schools, workplaces and other places with their own supply. Texas recorded 100% of these violations (6), the most of the 1 state or territory with at least one. 1 system still has an open violation.

Source: Computed by PlainEnviro from SDWIS quarter 2026Q3 and the UCMR 5 final occurrence data.

What is the federal limit for chlorobenzene in drinking water?

EPA's violation records for chlorobenzene carry the federal limit as "0.1 mg/L".

EPA's health goal (MCLG) for chlorobenzene is 0.1 mg/L, the level at which no known or anticipated health effect occurs. Potential health effects from long-term exposure above the limit, in EPA's words: Liver or kidney problems. Common sources in drinking water: Discharge from chemical and agricultural chemical factories.

Every federal drinking-water limit

Source: 40 CFR part 141 (National Primary Drinking Water Regulations), as cited; EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; EPA, National Primary Drinking Water Regulations table (MCLG, health effects, sources), read 2026-11-11.

How many water systems violated the chlorobenzene rules in 10 years?

Since October 1, 2016, EPA records 9,652 violations for chlorobenzene at 5,175 water systems: 9,646 monitoring and reporting and 6 over a maximum contaminant level (health-based).

Health-based chlorobenzene violations by the year the compliance period began (2016: October to December; 2026: to the third quarter) (violations)
00000003300
Health-based chlorobenzene violations by the year the compliance period began (2016: October to December; 2026: to the third quarter)
20160 violations
20170 violations
20180 violations
20190 violations
20200 violations
20210 violations
20220 violations
20233 violations
20243 violations
20250 violations
20260 violations
States with the most health-based chlorobenzene violations since October 2016
StateViolationsSystems
Texas61

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026; Health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.

Which water systems have an open chlorobenzene violation now?

1 violation for chlorobenzene at 1 system is open in the 2026Q3 data (not yet returned to compliance or resolved); 0 of them health-based.

Systems with an open chlorobenzene violation, largest first
Water systemPWSIDStatePeople servedOpenHealth-basedEarliest period
Hampton Homes Home Owners AssnID4010071ID0102026-01-01

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026.

Do industrial facilities release chlorobenzene?

Facilities also report releases of this substance to the Toxics Release Inventory: Chlorobenzene. A release to air, water or land is not a measurement of any water system's supply.

What do these records show, and what not?

States report each public water system's violations to EPA, which publishes them quarterly. A violation is a compliance record, not a test of the water in your tap; your utility's annual water quality report (the Consumer Confidence Report) and a certified laboratory answer that. Counts here are violations with a compliance period beginning on or after October 1, 2016. How the data is checked

Sources: the EPA files behind this page
  • EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
  • EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
  • EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
  • EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
  • EPA: find your local Consumer Confidence Report: www.epa.gov