PlainEnviro

Non-transient non-community water system · Ohio

Dayton Vamc Water Treatment Plant-BLD330 drinking water

Dayton Vamc Water Treatment Plant-BLD330 (OH5750616) is a non-transient non-community water system in Ohio serving 3,216 people from purchased surface water. In the 10 years to the 2026 third-quarter report, EPA records 1 health-based violation and 3 monitoring, reporting or notice violations. Its latest lead 90th percentile (monitoring period beginning January 2025) was 0.001 mg/L, below the 0.015 mg/L action level that requires a system to act. (EPA SDWA data, October 14, 2026.)

Check this record at EPA: ECHO drinking water report for OH5750616

3,216people served

1health-based violation, 10 years

0violations still open

0.001mg/Llead, 90th percentile (period from 2025)

Is the water from Dayton Vamc Water Treatment Plant-BLD330 safe to drink?

Dayton Vamc Water Treatment Plant-BLD330 had 1 health-based violation in the 10 years to October 2026: a required treatment step not met. Every violation since October 2016 is resolved or archived.

In Ohio, 25% of the 1,122 active community systems had a health-based violation in the same 10 years.

In its measured results, its latest lead 90th percentile (period beginning January 2025) was 0.001 mg/L, below the 0.015 mg/L action level. It draws on purchased surface water for 3,216 people.

This is Dayton Vamc Water Treatment Plant-BLD330's compliance record, not a test of the water at your tap: what the records cannot tell you, and who can.

Source: EPA Safe Drinking Water Information System (SDWIS), federal data download, quarter 2026Q3, released October 14, 2026. Confirm in EPA ECHO drinking water search.

What violations does EPA record for Dayton Vamc Water Treatment Plant-BLD330?

EPA records 4 violations for Dayton Vamc Water Treatment Plant-BLD330 since October 2016: 2 monitoring and reporting, 1 reporting, and 1 treatment technique.

Violations since October 2016, newest first
Contaminant or ruleKindCompliance periodStatus
Lead and Copper Rule RevisionsReportingsince October 2024Resolved
Lead and Copper Rule RevisionsTreatment technique (health-based)since October 2024Resolved
Total Haloacetic Acids (HAA5)Monitoring and reportingJanuary 2024 to December 2024Resolved
TTHMMonitoring and reportingJanuary 2024 to December 2024Resolved
Violations by year the compliance period began, Dayton Vamc Water Treatment Plant-BLD330 (violations)
0000000400
Violations by year the compliance period began, Dayton Vamc Water Treatment Plant-BLD330
20170 violations
20180 violations
20190 violations
20200 violations
20210 violations
20220 violations
20230 violations
20244 violations
20250 violations
20260 violations

Source: SDWIS violations and enforcement, quarter 2026Q3; health-based means a maximum contaminant level, residual disinfectant level or treatment technique was not met.

How much lead and copper is in Dayton Vamc Water Treatment Plant-BLD330's tap samples?

Lead, 90th percentile of tap samples (period beginning January 2025)0.00080 mg/L Below the action level

Over the action level (Dayton Vamc Water Treatment Plant-BLD330's result is a 90th percentile: what that is), a system must treat the water to make it less corrosive, tell the public and replace lead lines. The Lead and Copper Rule Improvements (in effect since December 30, 2024) lower the lead action level to 0.010 mg/L from November 1, 2027.

Source: SDWIS lead and copper sample summaries (90th percentiles), quarter 2026Q3; Lead and Copper Rule Improvements: Federal Register, published October 30, 2024, effective December 30, 2024; 40 CFR 141.80(a)(4)(i) keeps 0.015 mg/L until November 1, 2027 and 141.80(c)(1) sets 0.010 mg/L from then (eCFR); both read November 11, 2026.

Who does Dayton Vamc Water Treatment Plant-BLD330 serve, and where does its water come from?

Dayton Vamc Water Treatment Plant-BLD330 is a non-transient non-community water system; EPA's inventory lists its owner type as federal government, on EPA's inventory since 2017.

Community systems publish an annual water quality report (Consumer Confidence Report); a school or workplace system reports to its own users; how to find yours (EPA).

Source: SDWIS water system inventory and geographic areas served, quarter 2026Q3.

What other environmental records are in Montgomery County?

The TRI facilities in Montgomery County that reported the most toxic releases:

  1. Plating Technology Inc. Dayton Plant 202,217 pounds
  2. Crown Cork & Seal Co Inc 102,047 pounds
  3. Dupont Electronic Polymers 70,939 pounds
  4. Primary Products Ingredients Americas LLC - Dayton 36,285 pounds
  5. Hohman Plating & Manufacturing Inc 19,941 pounds

Superfund sites in Montgomery County: Mound Plant (USDOE) (on the National Priorities List); Powell Road Landfill (on the National Priorities List); Sanitary Landfill Co. (Industrial Waste Disposal Co., Inc.) (on the National Priorities List); South Dayton Dump & Landfill (proposed for the list); North Sanitary Landfill (on the National Priorities List).

A facility or site in the same county is not evidence that it affects this system's water; source-water protection is assessed by the state.

Source: EPA Toxics Release Inventory 2024 and EPA SEMS National Priorities List, as of October 28, 2026.

Sources: the EPA files behind this page
  • EPA Safe Drinking Water Act data download (SDWIS), quarter 2026Q3, October 14, 2026: echo.epa.gov
  • EPA Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) occurrence data, final data, August 2026: www.epa.gov
  • EPA Lead and Copper Rule and Lead and Copper Rule Improvements: www.epa.gov
  • EPA PFAS National Primary Drinking Water Regulation (2024) and the May 2026 proposal: www.epa.gov
  • EPA: find your local Consumer Confidence Report: www.epa.gov
  • EPA Toxics Release Inventory basic data files, reporting years 2019-2024, reporting year 2024 processed November 5, 2025: www.epa.gov
  • EPA SEMS: all final, proposed and deleted NPL sites with dates, category and contaminants, report dated October 28, 2026: www.epa.gov