EPA TRI Facility · Fabricated Metals

George Industries

Los Angeles, CA

Total releases
522.8K lbs
Chemicals reported
2
Latest report
2023
Primary pathway
Off-site Transfers

George Industries is an EPA Toxics Release Inventory reporter in Los Angeles, CA, in the fabricated metals sector. It reported 20.1K lbs of releases across 2 chemicals in 2023, and 522.8K lbs in total across its 2019-2023 reporting years. That ranks 1,894 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. Reported volume rose against 2022. Pounds reported are not a measure of toxicity or health risk.

View saved records
Verify at EPA TRI →

George Industries has reported 522.8K lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 99% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#1,894 of 25,986 TRI facilities nationwide by total reported releases - among the top 7.3% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk.

Where this facility sits in the TRI record

Among the 3,421 Fabricated Metals facilities in this database, George Industries reports the 95th-largest volume, placing it in the top 2.8% of its sector. Its reported volume is concentrated rather than spread: Nitrate compounds (water dissociable; reportable only when in aqueous solution) alone is 99.1% of the total.

Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.

George Industries files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332813 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 522.8K lbs in cumulative toxic releases across 2 distinct chemicals.

The dominant release pathway is off-site transfers at 517.8K lbs (99.0% of total volume), followed by air releases at 1.0%. Between 2019 and 2023, reported totals decreased by 92% - from 241.0K lbs to 20.1K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that George Industries has filed with the EPA under federal community right-to-know requirements.

Annual disclosure change

What changed: EPA TRI 2023 reporting year

2022 → 2023
  • George Industries's total reported releases rose from 987 lb in 2022 to 20.1 thousand lb in 2023, based on EPA TRI filings.
  • George Industries's off-site transfers rose from 0 lb in 2022 to 19.0 thousand lb in 2023, based on EPA TRI filings.
  • George Industries's air releases rose from 987 lb in 2022 to 1.1 thousand lb in 2023, based on EPA TRI filings.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332813
Total Releases
522.8K lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how George Industries stacks up against nearby facilities and the typical reporter.

Total reported releases
George Industries
522.8K lbs
Polychemie Inc
3.0K lbs

173.4× more than the comparison

Chemicals reported
George Industries
2
Polychemie Inc
4

50% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How George Industries releases toxic chemicals into the environment. Total: 522.8K lbs.

Off-site Transfers 517.8K lbs (99.0%)
Air Releases 5.0K lbs (1.0%)
Water Discharges 1 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 92% (241.0K lbs to 20.1K lbs).

Reported total releases by year

George Industries - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 241.0K lbs 2
2020 247.7K lbs 2
2021 13.0K lbs 2
2022 987 lbs 2
2023 20.1K lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). Sorted by total release volume.

Chemical Total Flags
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 517.9K lbs -
Nitric acid 4.9K lbs -

Location

Coordinates
34.0595, -118.1785
ZIP Code
90063
EPA Facility ID
90063GRGND4116W

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does George Industries release?
George Industries has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 522.8K lbs.
What industry is George Industries in?
George Industries is classified under the "Fabricated Metals" industry (NAICS code 332813), located in Los Angeles, CA.
How long has George Industries reported to the TRI?
George Industries has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does George Industries release toxic chemicals?
The primary release pathway for George Industries is off-site transfers, accounting for 99.0% of total releases (517.8K lbs). Secondary pathway: air releases (1.0%).
Are emissions from George Industries increasing or decreasing?
From 2019 to 2023, total releases decreased by 92%, from 241.0K lbs to 20.1K lbs.
Is George Industries a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by George Industries are rising or falling over time. View trends
  • This facility ranks #1,894 of 25,986 TRI facilities nationwide by total reported releases - among the top 7.3% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check California's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View California profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on George Industries. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.