EPA TRI Facility · Computers and Electronic Products
Winslow Automation Six Sigma
Milpitas, CA
- Total releases
- 1.1K lbs
- Chemicals reported
- 1
- Carcinogens
- 1
- Primary pathway
- Off-site Transfers
Winslow Automation Six Sigma is an EPA Toxics Release Inventory reporter in Milpitas, CA, in the computers and electronic products sector. It reported 589 lbs of releases across 1 chemical in 2020, and 1.1K lbs in total across its 2019-2020 reporting years. That ranks 13,704 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. Pounds reported are not a measure of toxicity or health risk.
Winslow Automation Six Sigma has reported 1.1K lbs of toxic releases across 1 chemical to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 100% of the facility's chemical profile. The facility operates in the Computers and Electronic Products sector. The primary release pathway is off-site transfers, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.
Where this facility sits in the TRI record
Among the 760 Computers and Electronic Products facilities in this database, Winslow Automation Six Sigma reports the 247th-largest volume (1.1K lbs). Its reported volume is concentrated rather than spread: Lead alone is 100% of the total. Carcinogen-classified chemicals make up 100% of the reported pounds, not just of the chemical count.
Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.
Winslow Automation Six Sigma files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 334413 (Computers and Electronic Products). Across 2 years of records spanning 2019–2020, the site has disclosed 1.1K lbs in cumulative toxic releases across 1 distinct chemical, 1 of which (100%) carry a carcinogenic classification.
The dominant release pathway is off-site transfers at 1.1K lbs (100.0% of total volume). Between 2019 and 2020, reported totals increased by 14% - from 517 lbs to 589 lbs.
TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Winslow Automation Six Sigma has filed with the EPA under federal community right-to-know requirements.
Quick Facts
Compare this facility
See how Winslow Automation Six Sigma stacks up against nearby facilities and the typical reporter.
About the same as the comparison
About the same as the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Winslow Automation Six Sigma releases toxic chemicals into the environment. Total: 1.1K lbs.
Emissions Trend Summary
From 2019 to 2020, total releases increased by 14% (517 lbs to 589 lbs).
Reported total releases by year
Winslow Automation Six Sigma - annual TRI totals
- 2019 0
2019
0 million lbs
- 2020 0
2020
0 million lbs
What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 517 lbs | 1 |
| 2020 | 589 lbs | 1 |
Chemical Releases
Aggregated across all reporting years (2019–2020). 1 of 1 chemicals are carcinogens. Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Lead | 1.1K lbs | Carcinogen |
Location
Nearest TRI Facilities to Winslow Automation Six Sigma
The closest other reporting facilities in California, ordered by distance.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.
Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.
PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.
Frequently Asked Questions
What chemicals does Winslow Automation Six Sigma release? ▼
What industry is Winslow Automation Six Sigma in? ▼
How long has Winslow Automation Six Sigma reported to the TRI? ▼
How does Winslow Automation Six Sigma release toxic chemicals? ▼
Are emissions from Winslow Automation Six Sigma increasing or decreasing? ▼
Is Winslow Automation Six Sigma a health risk? ▼
Does Winslow Automation Six Sigma release carcinogens? ▼
Explore More Data for California
What to do with this facility's data
Use this facility profile as a starting point, then check how it compares.
- See whether releases reported by Winslow Automation Six Sigma are rising or falling over time. View trends
- This facility ranks #13,704 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
- Check California's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View California profile
TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.
Read our methodology - how this data is sourced, computed, and verified.
Related
Sources & how this page was built
Every figure on this page traces to public, federal-government data on Winslow Automation Six Sigma. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program, chemical & reporting reference - what each chemical is and how releases are counted. epa.gov
- EPA Facility Registry Service (FRS) - authoritative facility location and identity. epa.gov
- EPA Enforcement & Compliance History Online (ECHO) - regulatory and compliance context. echo.epa.gov
- EPA Envirofacts - the EPA data warehouse that exposes these datasets. enviro.epa.gov
Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.
According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.