Shintech Plaquemine Plant – Emissions Trend

Plaquemine, LA · 2019–2023 · Parent: C-K Tech Inc

This page assembles 5 consecutive years of EPA Toxics Release Inventory Form R filings for Shintech Plaquemine Plant, spanning 2019–2023. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.

Reported releases opened at 267.4K in 2019 and closed at 386.7K in 2023 – a increase of 44.6% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Ammonia at 640.2K, followed by Chlorine at 301.7K.

Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this chemicals facility.

Overall Trend
↑ Increasing (+44.6%)
2019 Total
267.4K lbs
2023 Total
386.7K lbs

Total Releases by Category

Air
Water
Land
Offsite Transfer
079.3K158.5K237.8K317.0K396.3K 20192020202120222023 Pounds Released

Year-over-Year Comparison

Year Total Chemicals YoY Change
2019 267.4K lbs 32 -
2020 396.3K lbs 37 +48.2%
2021 334.7K lbs 37 -15.5%
2022 369.2K lbs 37 +10.3%
2023 386.7K lbs 37 +4.7%

Top Chemicals by Year

Chemical 20192020202120222023 Total
Ammonia 72.3K 152.1K 148.6K 135.3K 131.9K 640.2K
Chlorine 53.1K 56.0K 64.3K 65.2K 63.1K 301.7K
Hydrochloric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 39.5K 38.6K 44.3K 53.7K 53.9K 230.0K
n-Hexane 31.3K 23.1K 18.3K 40.5K 39.4K 152.6K
Ethylene 9.9K 72.3K 12.2K 17.2K 39.5K 151.0K
Vinyl chloride 23.0K 12.3K 16.3K 18.8K 12.7K 83.0K
1,2-Dichloroethane 15.2K 13.2K 11.2K 13.6K 9.9K 63.2K
Methanol 10.9K 11.6K 12.7K 15.4K 12.4K 63.0K
Propylene 9.1K 4.0K 934 1.3K 5.5K 20.9K
1,3-Butadiene - 5.2K 733 1.4K 10.1K 17.3K
Benzene 736 4.6K 1.4K 1.7K 4.0K 12.5K
Lead 277 280 992 2.0K 2.4K 6.0K
Chloroethane 182 747 973 1.3K 421 3.6K
1,1,2-Trichloroethane 831 646 532 539 194 2.7K
Chloroform 326 253 364 437 721 2.1K

About This Data

Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.

A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.

Frequently Asked Questions

Is Shintech Plaquemine Plant getting cleaner or dirtier?
Based on EPA TRI data from 2019–2023, Shintech Plaquemine Plant's total toxic releases have increased by approximately 45%.
What time period does this trend data cover?
This page shows 5 years of EPA Toxic Release Inventory data from 2019–2023. Release quantities are self-reported estimates filed annually by the facility.