EPA TRI Facility · Fabricated Metals

Fema Component Manufacturing

Otsego, MI · Parent: Fema Corp of Michigan Inc

Total releases
9.3K lbs
Chemicals reported
1
Carcinogens
1
Primary pathway
Off-site Transfers

Fema Component Manufacturing is an EPA Toxics Release Inventory reporter in Otsego, MI, in the fabricated metals sector. It reported 3.1K lbs of releases across 1 chemical in 2023, and 9.3K lbs in total across its 2021-2023 reporting years. That ranks 9,964 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. Reported volume fell against 2022. Pounds reported are not a measure of toxicity or health risk.

View saved records
Verify at EPA TRI →

Fema Component Manufacturing has reported 9.3K lbs of toxic releases across 1 chemical to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 100% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#9,964 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Where this facility sits in the TRI record

Among the 3,421 Fabricated Metals facilities in this database, Fema Component Manufacturing reports the 1,184th-largest volume (9.3K lbs). Its reported volume is concentrated rather than spread: Lead alone is 100% of the total. Carcinogen-classified chemicals make up 100% of the reported pounds, not just of the chemical count.

Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.

Fema Component Manufacturing files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332721 (Fabricated Metals). Across 3 years of records spanning 2021–2023, the site has disclosed 9.3K lbs in cumulative toxic releases across 1 distinct chemical, 1 of which (100%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 9.3K lbs (100.0% of total volume). Between 2021 and 2023, reported totals increased by 7% - from 2.9K lbs to 3.1K lbs. The facility is operated under parent company Fema Corp of Michigan Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Fema Component Manufacturing has filed with the EPA under federal community right-to-know requirements.

Annual disclosure change

What changed: EPA TRI 2023 reporting year

2022 → 2023
  • Fema Component Manufacturing's total reported releases fell from 3.3 thousand lb in 2022 to 3.1 thousand lb in 2023, based on EPA TRI filings.
  • Fema Component Manufacturing's off-site transfers fell from 3.3 thousand lb in 2022 to 3.1 thousand lb in 2023, based on EPA TRI filings.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332721
Total Releases
9.3K lbs
Chemicals Reported
1
Latest Report Year
2023

Compare this facility

See how Fema Component Manufacturing stacks up against nearby facilities and the typical reporter.

Total reported releases
Fema Component Manufacturing
9.3K lbs
Parker Hannifin
6.3K lbs

47% more than the comparison

Chemicals reported
Fema Component Manufacturing
1
Parker Hannifin
2

50% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Fema Component Manufacturing releases toxic chemicals into the environment. Total: 9.3K lbs.

Off-site Transfers 9.3K lbs (100.0%)
View 3-Year Emissions Trend →

Emissions Trend Summary

From 2021 to 2023, total releases increased by 7% (2.9K lbs to 3.1K lbs).

Reported total releases by year

Fema Component Manufacturing - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2021 2.9K lbs 1
2022 3.3K lbs 1
2023 3.1K lbs 1

Chemical Releases

Aggregated across all reporting years (2021–2023). 1 of 1 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Lead 9.3K lbs Carcinogen

Location

Coordinates
42.4537, -85.7099
ZIP Code
49078
EPA Facility ID
4907WFMCMP555WA

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Fema Component Manufacturing release?
Fema Component Manufacturing has reported releases of 1 chemical to the EPA Toxic Release Inventory, totaling 9.3K lbs. 1 of these (100%) are classified as carcinogens.
What industry is Fema Component Manufacturing in?
Fema Component Manufacturing is classified under the "Fabricated Metals" industry (NAICS code 332721), located in Otsego, MI.
How long has Fema Component Manufacturing reported to the TRI?
Fema Component Manufacturing has EPA Toxic Release Inventory data spanning 3 years, from 2021 to 2023.
How does Fema Component Manufacturing release toxic chemicals?
The primary release pathway for Fema Component Manufacturing is off-site transfers, accounting for 100.0% of total releases (9.3K lbs).
Are emissions from Fema Component Manufacturing increasing or decreasing?
From 2021 to 2023, total releases increased by 7%, from 2.9K lbs to 3.1K lbs.
Is Fema Component Manufacturing a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Fema Component Manufacturing release carcinogens?
Yes, Fema Component Manufacturing reports 1 chemical classified as carcinogens, representing 100% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Fema Component Manufacturing are rising or falling over time. View trends
  • This facility ranks #9,964 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Michigan's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Michigan profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Fema Component Manufacturing. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.