EPA TRI Facility · Plastics and Rubber
Precision Coatings Inc.
Walled Lake, MI
- Total releases
- 40.1K lbs
- Chemicals reported
- 2
- Latest report
- 2023
- Primary pathway
- Air Releases
Precision Coatings Inc. is an EPA Toxics Release Inventory reporter in Walled Lake, MI, in the plastics and rubber sector. It reported 40.1K lbs of releases across 2 chemicals in 2023. That ranks 6,735 of 25,986 TRI facilities nationwide by reported pounds. Reported volume rose against 2022. Pounds reported are not a measure of toxicity or health risk.
Precision Coatings Inc. has reported 40.1K lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Plastics and Rubber sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.
Where this facility sits in the TRI record
Among the 1,504 Plastics and Rubber facilities in this database, Precision Coatings Inc. reports the 542nd-largest volume (40.1K lbs). Its reported volume is concentrated rather than spread: Toluene alone is 72.6% of the total.
Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.
Precision Coatings Inc. files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 326113 (Plastics and Rubber). Across 5 years of records spanning 2019–2023, the site has disclosed 40.1K lbs in cumulative toxic releases across 2 distinct chemicals.
The dominant release pathway is air releases at 40.1K lbs (100.0% of total volume). Between 2019 and 2023, reported totals increased by 205% - from 3.9K lbs to 11.9K lbs.
TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Precision Coatings Inc. has filed with the EPA under federal community right-to-know requirements.
Annual disclosure change
What changed: EPA TRI 2023 reporting year
- Precision Coatings Inc.'s total reported releases rose from 11.7 thousand lb in 2022 to 11.9 thousand lb in 2023, based on EPA TRI filings.
- Precision Coatings Inc.'s air releases rose from 11.7 thousand lb in 2022 to 11.9 thousand lb in 2023, based on EPA TRI filings.
Quick Facts
Compare this facility
See how Precision Coatings Inc. stacks up against nearby facilities and the typical reporter.
343.9× more than the comparison
About the same as the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Precision Coatings Inc. releases toxic chemicals into the environment. Total: 40.1K lbs.
Emissions Trend Summary
From 2019 to 2023, total releases increased by 205% (3.9K lbs to 11.9K lbs).
Reported total releases by year
Precision Coatings Inc. - annual TRI totals
- 2019 0
2019
0 million lbs
- 2020 0
2020
0 million lbs
- 2021 0
2021
0 million lbs
- 2022 0
2022
0 million lbs
- 2023 0
2023
0 million lbs
What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 3.9K lbs | 2 |
| 2020 | 3.8K lbs | 2 |
| 2021 | 8.9K lbs | 2 |
| 2022 | 11.7K lbs | 2 |
| 2023 | 11.9K lbs | 2 |
Location
Nearest TRI Facilities to Precision Coatings Inc.
The closest other reporting facilities in Michigan, ordered by distance.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.
Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.
PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.
Frequently Asked Questions
What chemicals does Precision Coatings Inc. release? ▼
What industry is Precision Coatings Inc. in? ▼
How long has Precision Coatings Inc. reported to the TRI? ▼
How does Precision Coatings Inc. release toxic chemicals? ▼
Are emissions from Precision Coatings Inc. increasing or decreasing? ▼
Is Precision Coatings Inc. a health risk? ▼
Explore More Data for Michigan
What to do with this facility's data
Use this facility profile as a starting point, then check how it compares.
- See whether releases reported by Precision Coatings Inc. are rising or falling over time. View trends
- This facility ranks #6,735 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
- Check Michigan's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Michigan profile
TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.
Read our methodology - how this data is sourced, computed, and verified.
Related
Sources & how this page was built
Every figure on this page traces to public, federal-government data on Precision Coatings Inc.. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program, chemical & reporting reference - what each chemical is and how releases are counted. epa.gov
- EPA Facility Registry Service (FRS) - authoritative facility location and identity. epa.gov
- EPA Enforcement & Compliance History Online (ECHO) - regulatory and compliance context. echo.epa.gov
- EPA Envirofacts - the EPA data warehouse that exposes these datasets. enviro.epa.gov
Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.
According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.