Adm Corn Processing-Columbus – Emissions Trend

Columbus, NE · 2019–2023 · Parent: Archer Daniels Midland Co

This page assembles 5 consecutive years of EPA Toxics Release Inventory Form R filings for Adm Corn Processing-Columbus, spanning 2019–2023. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.

Reported releases opened at 525.8K in 2019 and closed at 528.1K in 2023 – a flat trend of 0.4% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Barium compounds (except for barium sulfate (CAS No. 7727-43-7)) at 1.8M, followed by Ammonia at 198.1K.

Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this food facility.

Overall Trend
→ Stable (+0.4%)
2019 Total
525.8K lbs
2023 Total
528.1K lbs

Total Releases by Category

Air
Water
Land
Offsite Transfer
0105.7K211.3K317.0K422.6K528.3K 20192020202120222023 Pounds Released

Year-over-Year Comparison

Year Total Chemicals YoY Change
2019 525.8K lbs 16 -
2020 359.8K lbs 15 -31.6%
2021 464.7K lbs 16 +29.2%
2022 528.3K lbs 19 +13.7%
2023 528.1K lbs 19 -0.0%

Top Chemicals by Year

Chemical 20192020202120222023 Total
Barium compounds (except for barium sulfate (CAS No. 7727-43-7)) 401.8K 289.4K 354.1K 406.8K 369.8K 1.8M
Ammonia 52.5K 25.5K 38.7K 41.1K 40.3K 198.1K
Acetaldehyde 43.0K 24.3K 45.2K 16.2K 48.0K 176.7K
Methanol 16.7K 11.3K 9.2K 33.9K 23.1K 94.2K
Hydrochloric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 1.9K - - 11.7K 21.2K 34.7K
Acrolein - - 3.2K 8.9K 8.3K 20.4K
Hydrogen sulfide 3.1K 3.6K 4.6K 2.7K 2.9K 16.9K
n-Hexane 797 2.1K 5.1K 136 4.3K 12.5K
Lead compounds 2.4K 915 775 4.2K 2.0K 10.2K
Formaldehyde 2.8K 2.1K 2.4K 1.2K 1.5K 10.1K
Sulfuric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) - - - - 5.4K 5.4K
Benzene 68 24 701 803 730 2.3K
Hydrogen fluoride 445 321 399 380 256 1.8K
Chlorine - 143 150 - 215 508
Toluene 118 49 36 203 34 440

About This Data

Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.

A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.

Frequently Asked Questions

Is Adm Corn Processing-Columbus getting cleaner or dirtier?
Based on EPA TRI data from 2019–2023, Adm Corn Processing-Columbus's total toxic releases have remained relatively stable.
What time period does this trend data cover?
This page shows 5 years of EPA Toxic Release Inventory data from 2019–2023. Release quantities are self-reported estimates filed annually by the facility.