Allied Moulded Products Inc. - Plant 3 – Emissions Trend
Bryan, OH · 2020–2023
This page assembles 4 consecutive years of EPA Toxics Release Inventory Form R filings for Allied Moulded Products Inc. - Plant 3, spanning 2020–2023. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.
Reported releases opened at 680 in 2020 and closed at 704 in 2023 – a flat trend of 3.5% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Styrene at 3.4K, followed by Zinc compounds at 0.
Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this plastics and rubber facility.
Total Releases by Category
Year-over-Year Comparison
| Year | Total | Chemicals | YoY Change |
|---|---|---|---|
| 2020 | 680 lbs | 2 | - |
| 2021 | 725 lbs | 1 | +6.6% |
| 2022 | 1.2K lbs | 2 | +72.3% |
| 2023 | 704 lbs | 2 | -43.6% |
Top Chemicals by Year
| Chemical | 2020 | 2021 | 2022 | 2023 | Total |
|---|---|---|---|---|---|
| Styrene | 680 | 725 | 1.2K | 704 | 3.4K |
| Zinc compounds | - | - | - | - | 0 |
About This Data
Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.
A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.
Frequently Asked Questions
Is Allied Moulded Products Inc. - Plant 3 getting cleaner or dirtier? ▼
What time period does this trend data cover? ▼
Read our methodology - how this data is sourced, computed, and verified.