Ati Specialty Alloys & Components LLC – Emissions Trend

Albany, OR · 2019–2023 · Parent: Ati Inc

This page assembles 5 consecutive years of EPA Toxics Release Inventory Form R filings for Ati Specialty Alloys & Components LLC, spanning 2019–2023. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.

Reported releases opened at 537.1K in 2019 and closed at 671.0K in 2023 – a increase of 24.9% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Methyl isobutyl ketone at 1.5M, followed by Barium compounds (except for barium sulfate (CAS No. 7727-43-7)) at 747.5K.

Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this primary metals facility.

Overall Trend
↑ Increasing (+24.9%)
2019 Total
537.1K lbs
2023 Total
671.0K lbs

Total Releases by Category

Air
Water
Land
Offsite Transfer
0170.7K341.5K512.2K682.9K853.7K 20192020202120222023 Pounds Released

Year-over-Year Comparison

Year Total Chemicals YoY Change
2019 537.1K lbs 13 -
2020 507.1K lbs 13 -5.6%
2021 507.1K lbs 13 -0.0%
2022 853.7K lbs 14 +68.4%
2023 671.0K lbs 14 -21.4%

Top Chemicals by Year

Chemical 20192020202120222023 Total
Methyl isobutyl ketone 199.3K 201.4K 233.8K 553.3K 355.5K 1.5M
Barium compounds (except for barium sulfate (CAS No. 7727-43-7)) - - 226.5K 243.0K 278.0K 747.5K
Barium And Barium Compounds 262.6K 212.2K - - - 474.9K
Ammonia 35.9K 55.2K 6.1K 7.3K 5.1K 109.7K
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 14.1K 14.1K 15.3K 15.7K 16.3K 75.5K
Hydrochloric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 11.6K 12.1K 12.4K 14.8K 3.9K 54.7K
Nickel 7.6K 6.5K 7.3K 7.4K 6.2K 35.1K
Nitric acid 1.5K 1.5K 1.5K 7.0K 2.2K 13.6K
Chlorine 2.9K 2.4K 2.6K 2.3K 2.3K 12.6K
Hydrogen fluoride 587 587 587 1.5K 680 4.0K
Phosgene 635 635 635 996 826 3.7K
Lead And Lead Compounds 270 421 - - - 691
Lead compounds - - 309 254 53 616
Polychlorinated biphenyls - - - 94 9 102
Hexachlorobenzene 9 9 18 25 17 78

About This Data

Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.

A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.

Frequently Asked Questions

Is Ati Specialty Alloys & Components LLC getting cleaner or dirtier?
Based on EPA TRI data from 2019–2023, Ati Specialty Alloys & Components LLC's total toxic releases have increased by approximately 25%.
What time period does this trend data cover?
This page shows 5 years of EPA Toxic Release Inventory data from 2019–2023. Release quantities are self-reported estimates filed annually by the facility.