Flury Foundry Co – Emissions Trend
Lancaster, PA · 2019–2024
This page assembles 6 consecutive years of EPA Toxics Release Inventory Form R filings for Flury Foundry Co, spanning 2019–2024. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.
Reported releases opened at 330 in 2019 and closed at 327 in 2024 – a flat trend of 1.0% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Copper at 2.0K, followed by Lead compounds at 234.
Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this primary metals facility.
Annual disclosure change
What changed: EPA TRI 2023 reporting year
- Flury Foundry Co's total reported releases rose from 425 lb in 2022 to 465 lb in 2023, based on EPA TRI filings.
- Flury Foundry Co's off-site transfers rose from 303 lb in 2022 to 334 lb in 2023, based on EPA TRI filings.
Total Releases by Category
Year-over-Year Comparison
| Year | Total | Chemicals | YoY Change |
|---|---|---|---|
| 2019 | 330 lbs | 2 | - |
| 2020 | 256 lbs | 2 | -22.5% |
| 2021 | 433 lbs | 2 | +69.2% |
| 2022 | 425 lbs | 2 | -1.8% |
| 2023 | 465 lbs | 2 | +9.4% |
| 2024 | 327 lbs | 2 | -29.7% |
Top Chemicals by Year
| Chemical | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | Total |
|---|---|---|---|---|---|---|---|
| Copper | 294 | 226 | 391 | 383 | 416 | 291 | 2.0K |
| Lead compounds | 36 | 30 | 42 | 42 | 49 | 36 | 234 |
About This Data
Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.
A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.
Frequently Asked Questions
Is Flury Foundry Co getting cleaner or dirtier? ▼
What time period does this trend data cover? ▼
Read our methodology - how this data is sourced, computed, and verified.