Samsung Austin Semiconductor – Emissions Trend

Austin, TX · 2019–2023

This page assembles 5 consecutive years of EPA Toxics Release Inventory Form R filings for Samsung Austin Semiconductor, spanning 2019–2023. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.

Reported releases opened at 674.6K in 2019 and closed at 347.0K in 2023 – a decrease of 48.6% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Ammonia at 1.2M, followed by Hydrogen fluoride at 318.8K.

Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this computers and electronic products facility.

Overall Trend
↓ Decreasing (-48.6%)
2019 Total
674.6K lbs
2023 Total
347.0K lbs

Total Releases by Category

Air
Water
Land
Offsite Transfer
0134.9K269.8K404.7K539.7K674.6K 20192020202120222023 Pounds Released

Year-over-Year Comparison

Year Total Chemicals YoY Change
2019 674.6K lbs 12 -
2020 270.2K lbs 11 -59.9%
2021 450.5K lbs 13 +66.7%
2022 379.0K lbs 13 -15.9%
2023 347.0K lbs 13 -8.4%

Top Chemicals by Year

Chemical 20192020202120222023 Total
Ammonia 470.8K 169.5K 227.8K 177.9K 154.0K 1.2M
Hydrogen fluoride 48.2K 43.6K 120.6K 51.4K 55.0K 318.8K
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 62.1K 35.2K 36.8K 39.4K 30.4K 204.0K
Copper And Copper Compounds - 3.6K - 43.5K 45.8K 92.9K
Propylene - - 23.9K 29.8K 24.1K 77.8K
Sodium dimethyldithiocarbamate 65.7K - - - - 65.7K
Ethylene glycol 133 404 22.5K 18.1K 18.7K 59.9K
Sulfuric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 6.5K 6.4K 5.5K 6.9K 6.9K 32.2K
Nitric acid 5.3K 2.1K 3.8K 3.6K 3.5K 18.4K
Ozone 2.8K 2.9K 2.9K 4.2K 4.2K 17.1K
Chlorine 3.6K 3.5K 1.5K 1.6K 1.6K 11.7K
Hydrochloric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 2.1K 1.8K 2.0K 1.4K 1.4K 8.7K
Copper compounds 6.1K - 2.2K - - 8.3K
Fluorine 1.2K 1.0K 1.0K 1.2K 1.2K 5.6K
Boron trichloride - - - - - 0

About This Data

Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.

A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.

Frequently Asked Questions

Is Samsung Austin Semiconductor getting cleaner or dirtier?
Based on EPA TRI data from 2019–2023, Samsung Austin Semiconductor's total toxic releases have decreased by approximately 49%.
What time period does this trend data cover?
This page shows 5 years of EPA Toxic Release Inventory data from 2019–2023. Release quantities are self-reported estimates filed annually by the facility.