Phillips 66 Ferndale Refinery – Emissions Trend

Ferndale, WA · 2019–2023 · Parent: Phillips 66 Co

This page assembles 5 consecutive years of EPA Toxics Release Inventory Form R filings for Phillips 66 Ferndale Refinery, spanning 2019–2023. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.

Reported releases opened at 205.0K in 2019 and closed at 367.4K in 2023 – a increase of 79.2% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Nitrate compounds (water dissociable; reportable only when in aqueous solution) at 572.3K, followed by Zinc compounds at 213.8K.

Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this petroleum facility.

Overall Trend
↑ Increasing (+79.2%)
2019 Total
205.0K lbs
2023 Total
367.4K lbs

Total Releases by Category

Air
Water
Land
Offsite Transfer
073.5K147.0K220.4K293.9K367.4K 20192020202120222023 Pounds Released

Year-over-Year Comparison

Year Total Chemicals YoY Change
2019 205.0K lbs 32 -
2020 295.1K lbs 33 +43.9%
2021 312.6K lbs 34 +5.9%
2022 344.0K lbs 34 +10.1%
2023 367.4K lbs 34 +6.8%

Top Chemicals by Year

Chemical 20192020202120222023 Total
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 70.9K 97.3K 126.4K 157.2K 120.5K 572.3K
Zinc compounds - 56.7K 32.9K 26.0K 98.1K 213.8K
n-Hexane 6.7K 32.1K 32.9K 30.3K 9.6K 111.5K
Toluene 22.2K 23.2K 21.1K 22.8K 18.5K 107.8K
Nickel And Nickel Compounds 23.5K 21.3K 12.3K 9.7K - 66.9K
Ammonia 19.1K 9.4K 11.3K 13.5K 5.9K 59.3K
Xylene (mixed isomers) 10.4K 10.8K 11.9K 13.8K 10.7K 57.6K
Hydrogen sulfide 17.4K 8.5K 9.1K 9.3K 7.5K 51.8K
Propylene 1.7K 3.1K 9.7K 15.8K 9.0K 39.3K
Benzene 9.1K 8.5K 6.9K 7.4K 7.0K 38.9K
Nickel compounds - - - - 36.7K 36.7K
Cyclohexane 5.1K 7.1K 7.0K 6.6K 5.7K 31.5K
Ethylene 28 29 11.0K 10.2K 9.6K 30.8K
Ethylbenzene 4.3K 4.3K 4.3K 5.0K 3.4K 21.3K
1,2,4-Trimethylbenzene 3.5K 3.5K 3.5K 3.9K 2.4K 16.7K

About This Data

Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.

A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.

Frequently Asked Questions

Is Phillips 66 Ferndale Refinery getting cleaner or dirtier?
Based on EPA TRI data from 2019–2023, Phillips 66 Ferndale Refinery's total toxic releases have increased by approximately 79%.
What time period does this trend data cover?
This page shows 5 years of EPA Toxic Release Inventory data from 2019–2023. Release quantities are self-reported estimates filed annually by the facility.