Waupaca Foundry Plant 1 – Emissions Trend

Waupaca, WI · 2019–2023 · Parent: Monomoy Capital Partners

This page assembles 5 consecutive years of EPA Toxics Release Inventory Form R filings for Waupaca Foundry Plant 1, spanning 2019–2023. Each annual total aggregates on-site air emissions, surface-water discharges, land disposal, and off-site transfers reported by the facility under EPCRA Section 313, which requires disclosure whenever a listed chemical is manufactured, processed, or otherwise used above threshold quantities.

Reported releases opened at 1.1M in 2019 and closed at 1.1M in 2023 – a flat trend of 2.2% over the window. The chart below stacks the four TRI release media (air, water, land, off-site) and overlays the yearly total. The top contributor by cumulative mass is Zinc compounds at 3.2M, followed by Manganese And Manganese Compounds at 848.5K.

Because TRI figures are estimated, not metered, year-over-year deltas can reflect methodology revisions, ownership changes, or shifts in what a facility classifies as reportable, not only physical emission changes. Treat the trajectory as a disclosure record, and cross-reference with the EPA Enforcement and Compliance History Online (ECHO) system for the fuller regulatory picture on this primary metals facility.

Overall Trend
→ Stable (-2.2%)
2019 Total
1.1M lbs
2023 Total
1.1M lbs

Total Releases by Category

Air
Water
Land
Offsite Transfer
0241.0K482.1K723.1K964.2K1.2M 20192020202120222023 Pounds Released

Year-over-Year Comparison

Year Total Chemicals YoY Change
2019 1.1M lbs 15 -
2020 897.9K lbs 14 -18.2%
2021 933.1K lbs 13 +3.9%
2022 1.2M lbs 12 +29.2%
2023 1.1M lbs 12 -10.9%

Top Chemicals by Year

Chemical 20192020202120222023 Total
Zinc compounds 677.0K 552.4K 575.2K 758.7K 675.2K 3.2M
Manganese And Manganese Compounds - - 244.3K 320.1K 284.1K 848.5K
Manganese compounds 286.1K 234.0K - - - 520.0K
Lead compounds 56.7K 46.2K 48.2K - - 151.1K
Lead And Lead Compounds - - - 63.5K 56.5K 120.0K
Benzene 23.0K 20.0K 20.3K 26.6K 24.5K 114.5K
Toluene 20.1K 17.2K 17.5K - - 54.8K
Phenol 9.6K 8.3K 8.5K 10.9K 10.3K 47.5K
Copper And Copper Compounds - - 7.9K 10.0K 8.7K 26.6K
Barium And Barium Compounds - - 5.0K 7.5K 6.8K 19.3K
Copper compounds 9.2K 7.5K - - - 16.7K
Chromium and Chromium Compounds(except for chromite ore mined in the Transvaal Region) - - 5.0K 6.2K 5.3K 16.5K
Barium compounds (except for barium sulfate (CAS No. 7727-43-7)) 5.8K 4.7K - - - 10.6K
Chromium compounds (except for chromite ore mined in the Transvaal Region) 5.7K 4.7K - - - 10.4K
Sulfuric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 1.8K 1.2K 1.3K 1.8K 1.8K 7.9K

About This Data

Trend data is sourced from the EPA Toxic Release Inventory (TRI). Facilities report annually. Release quantities are self-reported estimates. Year-over-year changes may reflect changes in production, pollution control measures, reporting methodology, or chemical thresholds.

A decrease in reported releases does not necessarily indicate improved environmental performance, as it may reflect production cutbacks, facility closures, or changes in reporting requirements. Similarly, increases may reflect expanded production rather than degraded environmental practices.

Frequently Asked Questions

Is Waupaca Foundry Plant 1 getting cleaner or dirtier?
Based on EPA TRI data from 2019–2023, Waupaca Foundry Plant 1's total toxic releases have remained relatively stable.
What time period does this trend data cover?
This page shows 5 years of EPA Toxic Release Inventory data from 2019–2023. Release quantities are self-reported estimates filed annually by the facility.