Brigham City Water Quality

Utah

Health Violations

The tap water in Brigham City, Utah is served by 3 EPA-regulated water systems covering approximately 122,752 people. 4 health-based violations are on record, most recently for 0700 in 2024. Data source: EPA Safe Drinking Water Information System.

3
Water Systems
122,752
Population Served
4
Total Violations
4
Health-Based Violations

Drinking water in Brigham City, Utah is delivered through 3 EPA-regulated community water systems serving an estimated 122,752 people. Each system is tracked in the EPA Safe Drinking Water Information System (SDWIS) under the Safe Drinking Water Act, which requires testing for regulated contaminants, consumer notification of violations, and publication of an annual Consumer Confidence Report.

The SDWIS record for Brigham City shows 4 total violations across all 3 systems, of which 4 are health-based, meaning either a Maximum Contaminant Level (MCL) was exceeded or a required treatment technique was not followed. Contaminants cited in health-based violations include 0700. 6 TRI-reporting industrial facilities are also located within the city limits.

A past EPA violation does not mean the water is currently unsafe, utilities are required to notify customers and remediate under state primacy oversight. For current water-quality status and treatment practices, review your local utility's most recent Consumer Confidence Report or contact the Utah drinking water program. All records above reflect federal EPA SDWIS data and are not independently verified against state databases.

Community Water Systems

System Name Pop. Served Violations Status
OGDEN CITY WATER SYSTEM 87,267 0 Clean
CLEARFIELD CITY WATER SYSTEM 33,540 4 Health
WEST CORINNE WATER CO 1,945 0 Clean

Does this city have health-based water violations?

Health-based violations indicate contaminant levels that exceeded EPA maximum contaminant levels (MCLs). This does not necessarily mean water is currently unsafe.

Contaminant Begin Date
0700 2024-12-03
0700 2024-03-16
0700 2017-10-01
0700 2017-10-01

TRI Facilities in Brigham City

Facility Total Releases
Storm Products Inc 119.4K lbs
Nucor Building Systems Llc-Utah 47.7K lbs
Nucor Corp Vulcraft Div 14.4K lbs
Autoliv N.a. 2.0K lbs
Geneva Rock Products Perry 0 lbs
Cmc Southern Post Utah 0 lbs

Frequently Asked Questions

Is Brigham City, Utah water safe to drink?
Brigham City is served by 3 EPA-regulated water systems covering approximately 122,752 people. 4 health-based violations have been recorded. A past violation does not necessarily mean water is currently unsafe, systems are required to notify customers and resolve issues. Contact your local water utility for current status.
How many water violations does Brigham City have?
Brigham City water systems have a total of 4 violations on record in the EPA Safe Drinking Water Information System, of which 4 are health-based (MCL exceedances). The remaining violations are monitoring or reporting violations.
What contaminants were found in Brigham City water?
Health-based violations for Brigham City water systems include the following contaminants: 0700. Source: EPA Safe Drinking Water Information System (SDWIS).
How many water systems serve Brigham City?
3 EPA-regulated community water systems serve Brigham City, Utah, collectively covering approximately 122,752 people. Data is from the EPA Safe Drinking Water Information System (SDWIS).
Where does Brigham City get its drinking water?
Brigham City's water supply comes from 3 EPA-regulated community water systems. Source type data is not available for all systems. For detailed supply information, contact your local water utility. Source: EPA SDWIS.
Are there pollution sources near Brigham City?
Yes, 6 EPA Toxic Release Inventory (TRI) facilities are registered in Brigham City, Utah, reporting a combined 183.5K lbs of toxic chemical releases. TRI data reflects self-reported emissions; it does not measure exposure or health effects. Source: EPA TRI.

About This Data

Water system data comes from the EPA's Safe Drinking Water Information System (SDWIS). Violations are reported by state agencies to EPA and include both health-based (MCL exceedances) and monitoring/reporting violations.

A reported violation does not necessarily mean water is currently unsafe to drink. Many violations are resolved quickly, and public water systems are required to notify customers of significant issues. For current water quality, contact your local water utility.

TRI facility data comes from the EPA Toxic Release Inventory. Facilities shown are those that self-report to the TRI program. PlainEnviro presents this data without advocacy framing.

Related

Data sourced from U.S. EPA environmental datasets. See our methodology for details. Retrieved and formatted by PlainEnviro Editorial