Park City Water Quality

Utah

Health Violations

According to EPA SDWIS, Park City, Utah is served by 6 community water systems covering about 22,954 people. The same extract lists 10 health-based violation records, most recently coded 8000 in 2023. Counts are historical EPA registry rows, not a current compliance or drinkability score.

6
Water Systems
22,954
Population Served
10
Health-Based Violation Records
4
Distinct Contaminant Codes

Drinking water in Park City, Utah is delivered through 6 EPA-regulated community water systems serving an estimated 22,954 people. Each system is tracked in the EPA Safe Drinking Water Information System (SDWIS) under the Safe Drinking Water Act, which requires testing for regulated contaminants, consumer notification of violations, and publication of an annual Consumer Confidence Report.

PlainEnviro's health-based SDWIS extract shows 10 violation records across the 6 active community systems shown here. Monitoring and reporting records are not present in the extract. The records carry 4 distinct EPA contaminant codes: Revised Total Coliform Rule, Groundwater Rule, Antimony, Total, Surface Water Treatment Rule. 1 TRI-reporting industrial facility is also located within the city limits.

A past EPA health-based registry row does not describe water delivered today or current compliance status; utilities notify customers and remediate under state primacy oversight when required. For current water-quality status and treatment practices, review your local utility's most recent Consumer Confidence Report or contact the Utah drinking water program. All records above reflect federal EPA SDWIS data and are not independently verified against state databases.

Community Water Systems

System Name Pop. Served Violations Status
PARK CITY WATER SYSTEM 8,875 3 Health
MOUNTAIN REGIONAL WATER SSD 8,245 2 Health
GORGOZA MUTUAL WATER CO 4,305 0 Clean
HIGH VALLEY WATER CO 850 0 Clean
SUMMIT COUNTY SERVICE AREA #3 600 0 Clean
WANSHIP WATER CO. LLC 79 5 Health

Does this city have health-based water violations?

These health-based records can represent Maximum Contaminant Level (MCL), Treatment Technique (TT), or Maximum Residual Disinfectant Level (MRDL) categories. A historical record does not establish that water is currently unsafe.

Water system Contaminant Begin Date
WANSHIP WATER CO. LLC Revised Total Coliform Rule 2023-09-22
WANSHIP WATER CO. LLC Revised Total Coliform Rule 2023-09-22
WANSHIP WATER CO. LLC Groundwater Rule 2015-02-12
WANSHIP WATER CO. LLC Groundwater Rule 2015-02-12
WANSHIP WATER CO. LLC Groundwater Rule 2011-05-06
MOUNTAIN REGIONAL WATER SSD Groundwater Rule 2009-12-02
MOUNTAIN REGIONAL WATER SSD Groundwater Rule 2009-12-01
PARK CITY WATER SYSTEM Antimony, Total 2009-11-30
PARK CITY WATER SYSTEM Antimony, Total 2009-11-30
PARK CITY WATER SYSTEM Surface Water Treatment Rule 2006-03-02

What are Park City's health-based records for?

Park City's health-based violation records carry 4 distinct EPA codes: some name a substance, others the drinking-water rule that was breached. Counts are records on file in the EPA SDWIS extract, not current test results.

Contaminant Records Systems
Groundwater Rule 5 2
Antimony, Total 2 1
Revised Total Coliform Rule 2 1
Surface Water Treatment Rule 1 1

TRI Facilities in Park City

Facility Total Releases
Geneva Rock Products Inc. - Park City Facility 0 lbs

Frequently Asked Questions

What does EPA SDWIS list for drinking water in Park City, Utah?
Park City is listed with 6 EPA-regulated water systems covering approximately 22,954 people. 10 health-based violation records appear in the extract. A past registry row is not a current drinkability verdict; contact the local utility for current status.
How many water violations does Park City have in this EPA extract?
Park City water systems have 10 health-based violation records in PlainEnviro's EPA SDWIS extract. This extract is filtered to EPA health-based records and does not include monitoring or reporting violations.
What contaminants were found in Park City water?
Health-based records for Park City water systems carry the following EPA contaminant codes: Revised Total Coliform Rule, Groundwater Rule, Antimony, Total, Surface Water Treatment Rule. This source edition does not include authoritative contaminant names. Source: EPA SDWIS.
How many water systems serve Park City?
6 EPA-regulated community water systems serve Park City, Utah, collectively covering approximately 22,954 people. Data is from the EPA Safe Drinking Water Information System (SDWIS).
Where does Park City get its drinking water?
Park City's water supply comes from 6 EPA-regulated community water systems. Source type data is not available for all systems. For detailed supply information, contact your local water utility. Source: EPA SDWIS.
Are there pollution sources near Park City?
Yes, 1 EPA Toxic Release Inventory (TRI) facility is registered in Park City, Utah, reporting a combined 0 lbs of toxic chemical releases. TRI data reflects self-reported emissions; it does not measure exposure or health effects. Source: EPA TRI.

How does Park City compare in Utah?

Of the 260 Utah places with at least one community water system on file, Park City ranks #16 by number of systems (6).

Either side of it: Eden (6), Kanab (6), Spanish Fork (6), Coalville (5)

About This Data

Figures here are the current EPA SDWIS extract joined to the 6 community water systems whose service area lists Park City, ranked against the 260 Utah places with at least one system on file. Data current as of 2026-08-25.

Water system data comes from the EPA's Safe Drinking Water Information System (SDWIS). PlainEnviro's violation fetch is restricted upstream to records EPA flags as health-based and then joined to active community water systems. Monitoring and reporting violations are not included.

A health-based violation row in this extract is a historical EPA registry entry. It does not describe water delivered today or current compliance status. Many records are later resolved, and public water systems notify customers when required. For current conditions, contact your local water utility or the state drinking water program.

TRI facility data comes from the EPA Toxic Release Inventory. Facilities shown are those that self-report to the TRI program. PlainEnviro presents this data without advocacy framing.

Related

Data sourced from U.S. EPA environmental datasets. See our methodology for details. Retrieved and formatted by PlainEnviro