Kent Water Quality

Washington

Health Violations

According to EPA SDWIS, Kent, Washington is served by 11 community water systems covering about 353,463 people. The same extract lists 8 health-based violation records, most recently coded 8000 in 2025. Counts are historical EPA registry rows, not a current compliance or drinkability score.

11
Water Systems
353,463
Population Served
8
Health-Based Violation Records
1
Distinct Contaminant Codes

Drinking water in Kent, Washington is delivered through 11 EPA-regulated community water systems serving an estimated 353,463 people. Each system is tracked in the EPA Safe Drinking Water Information System (SDWIS) under the Safe Drinking Water Act, which requires testing for regulated contaminants, consumer notification of violations, and publication of an annual Consumer Confidence Report.

PlainEnviro's health-based SDWIS extract shows 8 violation records across the 11 active community systems shown here. Monitoring and reporting records are not present in the extract. The records carry 1 distinct EPA contaminant code: Revised Total Coliform Rule. 15 TRI-reporting industrial facilities are also located within the city limits.

A past EPA health-based registry row does not describe water delivered today or current compliance status; utilities notify customers and remediate under state primacy oversight when required. For current water-quality status and treatment practices, review your local utility's most recent Consumer Confidence Report or contact the Washington drinking water program. All records above reflect federal EPA SDWIS data and are not independently verified against state databases.

Community Water Systems

System Name Pop. Served Violations Status
KENT WATER DEPARTMENT 166,421 0 Clean
HIGHLINE WATER DISTRICT 100,170 0 Clean
COVINGTON WATER DISTRICT 56,172 0 Clean
Lake Meridian Water District 24,231 0 Clean
KING COUNTY WATER DISTRICT #54 5,373 4 Health
SUGARLOAF WATER SYSTEM 468 0 Clean
LOCLOMAN SUBDIVISION 174 0 Clean
LAKE MERIDIAN ESTATES (MHP) 154 0 Clean
CRESTVIEW WEST WATER SYSTEM 147 3 Health
MOUNTAIN VIEW WATER DISTRICT INC 91 0 Clean
STONE CREEK ESTATES WATER ASSN. 62 1 Health

Does this city have health-based water violations?

These health-based records can represent Maximum Contaminant Level (MCL), Treatment Technique (TT), or Maximum Residual Disinfectant Level (MRDL) categories. A historical record does not establish that water is currently unsafe.

Water system Contaminant Begin Date
STONE CREEK ESTATES WATER ASSN. Revised Total Coliform Rule 2025-09-01
CRESTVIEW WEST WATER SYSTEM Revised Total Coliform Rule 2023-10-01
CRESTVIEW WEST WATER SYSTEM Revised Total Coliform Rule 2023-10-01
CRESTVIEW WEST WATER SYSTEM Revised Total Coliform Rule 2023-10-01
KING COUNTY WATER DISTRICT #54 Revised Total Coliform Rule 2023-06-01
KING COUNTY WATER DISTRICT #54 Revised Total Coliform Rule 2023-06-01
KING COUNTY WATER DISTRICT #54 Revised Total Coliform Rule 2023-06-01
KING COUNTY WATER DISTRICT #54 Revised Total Coliform Rule 2023-06-01

What are Kent's health-based records for?

Every health-based violation record in Kent carries one EPA contaminant or rule code. Counts are records on file in the EPA SDWIS extract, not current test results.

Contaminant Records Systems
Revised Total Coliform Rule 8 3

TRI Facilities in Kent

Facility Total Releases
Rexam Beverage Can Co Re: Kent Wa Facility 1.2M lbs
Burlington Environmental LLC 329.5K lbs
Protective Coatings Inc 58.6K lbs
Ranger Tugs Kent 43.8K lbs
Exotic Metals Forming Co 43.3K lbs
Hytek Finishes Co 34.5K lbs
Univar Solutions USA 13.6K lbs
Davis Wire Corp 12.4K lbs
Blue Origin LLC 5.2K lbs
Future Foam Inc. 921 lbs

Frequently Asked Questions

What does EPA SDWIS list for drinking water in Kent, Washington?
Kent is listed with 11 EPA-regulated water systems covering approximately 353,463 people. 8 health-based violation records appear in the extract. A past registry row is not a current drinkability verdict; contact the local utility for current status.
How many water violations does Kent have in this EPA extract?
Kent water systems have 8 health-based violation records in PlainEnviro's EPA SDWIS extract. This extract is filtered to EPA health-based records and does not include monitoring or reporting violations.
What contaminants were found in Kent water?
Health-based records for Kent water systems carry the following EPA contaminant codes: Revised Total Coliform Rule. This source edition does not include authoritative contaminant names. Source: EPA SDWIS.
How many water systems serve Kent?
11 EPA-regulated community water systems serve Kent, Washington, collectively covering approximately 353,463 people. Data is from the EPA Safe Drinking Water Information System (SDWIS).
Where does Kent get its drinking water?
Kent's water supply comes from 11 EPA-regulated community water systems. Source type data is not available for all systems. For detailed supply information, contact your local water utility. Source: EPA SDWIS.
Are there pollution sources near Kent?
Yes, 15 EPA Toxic Release Inventory (TRI) facilities are registered in Kent, Washington, reporting a combined 1.8M lbs of toxic chemical releases. TRI data reflects self-reported emissions; it does not measure exposure or health effects. Source: EPA TRI.

How does Kent compare in Washington?

Of the 365 Washington places with at least one community water system on file, Kent ranks #41 by number of systems (11).

Either side of it: Quincy (12), Snohomish (12), Lopez Island (11), Maple Falls (11)

About This Data

Figures here are the current EPA SDWIS extract joined to the 11 community water systems whose service area lists Kent, ranked against the 365 Washington places with at least one system on file. Data current as of 2026-08-25.

Water system data comes from the EPA's Safe Drinking Water Information System (SDWIS). PlainEnviro's violation fetch is restricted upstream to records EPA flags as health-based and then joined to active community water systems. Monitoring and reporting violations are not included.

A health-based violation row in this extract is a historical EPA registry entry. It does not describe water delivered today or current compliance status. Many records are later resolved, and public water systems notify customers when required. For current conditions, contact your local water utility or the state drinking water program.

TRI facility data comes from the EPA Toxic Release Inventory. Facilities shown are those that self-report to the TRI program. PlainEnviro presents this data without advocacy framing.

Related

Data sourced from U.S. EPA environmental datasets. See our methodology for details. Retrieved and formatted by PlainEnviro