EPA TRI Facility · Fabricated Metals
Cmc Impact Metals
Pell City, AL · Parent: Commercial Metals Co
- Total releases
- 0 lbs
- Chemicals reported
- 2
- Carcinogens
- 1
- Primary pathway
- -
Cmc Impact Metals is an EPA Toxics Release Inventory reporter in Pell City, AL, in the fabricated metals sector. That ranks 21,547 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Valtir LLC Plt 1577; Wkw N.a.; Trans-Cycle Industries Inc; Benjamin Moore & Co Pell City. Similar-scale Fabricated Metals peers outside Alabama: Sav-On Plating Inc; Custom Molded Products; Rebar Az Glendale; Capstone Precision Group. Other Commercial Metals Co sites in this extract: Structural Metals Inc; Cmc Rebar Arizona; Tamco; Cmc Steel Sc. Largest disclosed chemicals by pounds: Nickel compounds; Manganese compounds.
Cmc Impact Metals has reported 0 lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 50% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.
Where this facility sits in the TRI record
According to the EPA Toxics Release Inventory, Cmc Impact Metals filed Form R disclosures without reporting any release volume, one of 3,421 Fabricated Metals facilities in this database. A zero total means nothing was reported under EPCRA Section 313, not that the site was assessed and found clean.
Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.
Cmc Impact Metals files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332811 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 0 lbs in cumulative toxic releases across 2 distinct chemicals, 1 of which (50%) carry a carcinogenic classification. Largest chemicals by pounds: Nickel compounds; Manganese compounds.
Release pathway breakdown is not broken out in the facility record. The facility is operated under parent company Commercial Metals Co alongside Structural Metals Inc; Cmc Rebar Arizona; Tamco; Cmc Steel Sc. Nearest other TRI reporters: Valtir LLC Plt 1577; Wkw N.a.; Trans-Cycle Industries Inc; Benjamin Moore & Co Pell City. Similar-scale peers outside Alabama: Sav-On Plating Inc; Custom Molded Products; Rebar Az Glendale; Capstone Precision Group.
TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Cmc Impact Metals has filed with the EPA under federal community right-to-know requirements - open Valtir LLC Plt 1577 for a different chemical mix before treating volume as risk.
Quick Facts
Compare this facility
See how Cmc Impact Metals stacks up against nearby facilities and the typical reporter.
100% less than the comparison
67% less than the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
Emissions Trend Summary
Reported total releases by year
Cmc Impact Metals - annual TRI totals
- 2019 0
2019
0 million lbs
- 2020 0
2020
0 million lbs
- 2021 0
2021
0 million lbs
- 2022 0
2022
0 million lbs
- 2023 0
2023
0 million lbs
What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 0 lbs | 2 |
| 2020 | 0 lbs | 2 |
| 2021 | 0 lbs | 1 |
| 2022 | 0 lbs | 1 |
| 2023 | 0 lbs | 2 |
Chemical Releases
Aggregated across all reporting years (2019–2023). 1 of 2 chemicals are carcinogens. Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Nickel compounds | 0 lbs | Carcinogen |
| Manganese compounds | 0 lbs | - |
Location
Nearest TRI Facilities to Cmc Impact Metals
Closest other reporters in Alabama - including Valtir LLC Plt 1577, Wkw N.a., Trans-Cycle Industries Inc, ordered by distance.
Similar Fabricated Metals Facilities
Other Fabricated Metals facilities with similar total release volumes (±80%), outside Alabama - e.g. Sav-On Plating Inc, Custom Molded Products, Rebar Az Glendale.
Other Commercial Metals Co Facilities
Same-parent TRI sites ranked by reported releases - including Structural Metals Inc, Cmc Rebar Arizona, Tamco.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.
On this page the largest disclosed chemicals include Nickel compounds, Manganese compounds; nearby reporters include Valtir LLC Plt 1577. "Total releases" includes air, water, land, and off-site transfers for disposal, aggregated across available reporting years. Quantities are self-reported estimates, not measured stack emissions.
PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.
Frequently Asked Questions
What chemicals does Cmc Impact Metals release? ▼
What industry is Cmc Impact Metals in? ▼
How long has Cmc Impact Metals reported to the TRI? ▼
Is Cmc Impact Metals a health risk? ▼
Does Cmc Impact Metals release carcinogens? ▼
Explore More Data for Alabama
What to do with this facility's data
From Cmc Impact Metals, open Valtir LLC Plt 1577 or Sav-On Plating Inc next rather than reading rank alone.
- See whether releases reported by Cmc Impact Metals are rising or falling over time (watch Nickel compounds in the chemical mix). View trends
- Compare Cmc Impact Metals with nearby reporter Valtir LLC Plt 1577 before treating rank as risk. Open Valtir LLC Plt 1577
- Cross-check similar-scale peer Sav-On Plating Inc outside Alabama. Open Sav-On Plating Inc
Rank and named neighbors (Valtir LLC Plt 1577, Wkw N.a.) are disclosure volume only, not toxicity-weighted risk or enforcement status.
Read our methodology - how this data is sourced, computed, and verified.
Related
Sources & how this page was built
Every figure on this page traces to public, federal-government data on Cmc Impact Metals. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program, chemical & reporting reference - what each chemical is and how releases are counted. epa.gov
- EPA Facility Registry Service (FRS) - authoritative facility location and identity. epa.gov
- EPA Enforcement & Compliance History Online (ECHO) - regulatory and compliance context. echo.epa.gov
- EPA Envirofacts - the EPA data warehouse that exposes these datasets. enviro.epa.gov
Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.
According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.