EPA TRI Facility · Plastics and Rubber
Mfg/alabama LLC - Plant 2
Opp, AL · Parent: Molded Fiber Glass Co
- Total releases
- 16.8K lbs
- Chemicals reported
- 1
- Carcinogens
- 1
- Primary pathway
- Air Releases
AIR Form-R mix
Mfg/alabama LLC - Plant 2: how the 16.8K lbs splits
16.8K lbs across all reported pathways
- Air Releases 16.8K lbs 100.0%
Mfg/alabama LLC - Plant 2's 16.8K lbs Form-R total is AIR - air releases is 100.0% of the bar. Off-site transfers stay separate from air, water, and land releases. Leading chemical by pounds: Styrene.
LIGHT volume AIR pathway CARC-HEAVY
Mfg/alabama LLC - Plant 2 is an EPA Toxics Release Inventory reporter in Opp, AL, in the plastics and rubber sector. It reported 522 lbs of releases across 1 chemical in 2022, and 16.8K lbs in total across its 2019-2022 reporting years. That ranks 8,653 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In Alabama's 559 reporting TRI sites, Chemical Waste Management leads both reported pounds (95.6M lbs) and chemical count (98 chemicals). The two rankings do not invert in this pool. Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Mfg Alabama LLC; Dorsey Trailer; Arclin USA LLC; Pilgrim's Pride Enterprise Processing Plant. Similar-scale Plastics and Rubber peers outside Alabama: E J Painting & Fiberglass; Fiberglass Fabricators Inc.; Veka Inc; Shelby Foam System. Other Molded Fiber Glass Co sites in this extract: Molded Fiber Glass Composite Systems Co; Molded Fiber Glass Companies/texas; Molded Fiber Glass / Union City; Mfg Alabama LLC. Largest disclosed chemicals by pounds: Styrene.
Mfg/alabama LLC - Plant 2 stamps LIGHT volume with a dominant AIR pathway (100.0% air releases) across 1 chemical · 1 carcinogen-classified. Cumulative Form-R extract: 16.8K lbs (2019–2022). All figures are self-reported EPCRA §313 estimates, not measured stack emissions or a health-risk score. Scale peers include E J Painting & Fiberglass and Fiberglass Fabricators Inc..
Mfg/alabama LLC - Plant 2 vs. every reporting TRI facility
Cumulative reported release pounds, with this facility marked in the national distribution
17K lbs Top 33% higher than 67% of 25,986 reporting TRI facilities
Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.
Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year
Mfg/alabama LLC - Plant 2: Styrene-led volume
Among the 1,504 Plastics and Rubber facilities in this database, Mfg/alabama LLC - Plant 2 reports the 719th-largest volume (16.8K lbs). Its reported volume is concentrated rather than spread: Styrene alone is 100% of the total. Carcinogen-classified chemicals make up 100% of the reported pounds, not just of the chemical count. Scale peers outside Alabama include E J Painting & Fiberglass and Fiberglass Fabricators Inc..
Concentrated means ≥60% of Mfg/alabama LLC - Plant 2's pounds in one chemical - here Styrene at 100%. Not a toxicity score.
Mfg/alabama LLC - Plant 2 Form-R facts
Compare this facility
See how Mfg/alabama LLC - Plant 2 stacks up against nearby facilities and the typical reporter.
79% less than the comparison
About the same as the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Mfg/alabama LLC - Plant 2 releases toxic chemicals into the environment. Total: 16.8K lbs.
Emissions Trend Summary
From 2019 to 2022, total releases decreased by 94% (8.5K lbs to 522 lbs).
Mfg/alabama LLC - Plant 2: annual Form-R pounds
LIGHT site · AIR pathway · TRI years 2019–2022
- 2019 0
- 2020 0
- 2021 0
- 2022 0
What this shows Mfg/alabama LLC - Plant 2 year-over-year reported totals (decreased by 94% from 2019 to 2022). TRI figures are self-reported estimates and can swing with production, waste handling, and reporting changes, not only with controls. Lead chemical in the extract: Styrene.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 8.5K lbs | 1 |
| 2020 | 7.7K lbs | 1 |
| 2021 | 10 lbs | 1 |
| 2022 | 522 lbs | 1 |
Chemical Releases
Aggregated across all reporting years (2019–2022). 1 of 1 chemicals are carcinogens. Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Styrene | 16.8K lbs | Carcinogen |
Mfg/alabama LLC - Plant 2 · AIR-pathway site
Nearest TRI Facilities to Mfg/alabama LLC - Plant 2
Closest other reporters in Alabama - including Mfg Alabama LLC, Dorsey Trailer, Arclin USA LLC, ordered by distance.
Showing 8 of 558 other reporting facilities in Alabama.
Similar Plastics and Rubber Facilities
Other Plastics and Rubber facilities with similar total release volumes (±80%), outside Alabama - e.g. E J Painting & Fiberglass, Fiberglass Fabricators Inc., Veka Inc.
Compare beyond Alabama
Nationwide peers by reported pounds & chemical count
Cross-state TRI reporters nearest Mfg/alabama LLC - Plant 2 on cumulative reported pounds (16.8K lbs) and distinct chemical count (1). Release-pound peers include E J Painting & Fiberglass, Ball Brass & Aluminum Foundry, Rainier Plywood Co. Chemical-count peers include Ecoelectrica LP, Planta Penuelas, Tallaboa Puerto Rico LLC. Neighborhoods are forced disjoint so each axis surfaces a different set of sites.
Similar reported release pounds
Nearest out-of-state reporters (≥1,000 lbs) by absolute TRI pounds, not same-industry or same-county neighbors.
Similar chemical count
Nearest out-of-state reporters by distinct Form-R chemicals (deduped against the release-pound neighborhood).
Other Molded Fiber Glass Co Facilities
Same-parent TRI sites ranked by reported releases - including Molded Fiber Glass Composite Systems Co, Molded Fiber Glass Companies/texas, Molded Fiber Glass / Union City.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
On this page the largest disclosed chemicals include Styrene; nearby reporters include Mfg Alabama LLC. Mfg/alabama LLC - Plant 2 stamps LIGHT volume · AIR pathway · CARC-HEAVY carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.
Use and verify this record
This Mfg/alabama LLC - Plant 2 TRI extract (LIGHT · AIR · CARC-HEAVY · lead Styrene) joins EPA Form-R filings with facility identity - reported pounds, not a health-risk rating.
Mfg/alabama LLC - Plant 2 totals are self-reported EPCRA §313 estimates for Opp, AL, latest year 2022. Form-R rows span 2019–2022 (4 years). NAICS 326199 · Plastics and Rubber. 11.9% of Covington TRI pounds in this extract. Nearest ABS peer: E J Painting & Fiberglass (Δ 14 lbs). Pounds ≠ exposure.
Mfg/alabama LLC - Plant 2 stamps LIGHT volume · AIR pathway · CARC-HEAVY · lead Styrene. PlainEnviro renders this EPA Form-R extract from its pipeline; no figure is typed in by an editor. Corrections: editorial policy.
All federal data sources used on this page
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
- EPA Facility Registry Service - facility location and identity. epa.gov
- EPA ECHO - regulatory and compliance context. epa.gov
- EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov