EPA TRI Facility · Primary Metals

Taber Extrusions LLC

Russellville, AR · Parent: National Materials LP

Total releases
361 lbs
Chemicals reported
3
Latest report
2023
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Taber Extrusions LLC has reported 361 lbs of toxic releases across 3 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Primary Metals sector. The primary release pathway is off-site transfers, accounting for 43% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#15,177 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Taber Extrusions LLC files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331318 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 361 lbs in cumulative toxic releases across 3 distinct chemicals.

The dominant release pathway is off-site transfers at 154 lbs (42.8% of total volume), followed by air releases at 36.1%. Between 2019 and 2023, reported totals decreased by 57% - from 123 lbs to 53 lbs. The facility is operated under parent company National Materials LP.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Taber Extrusions LLC has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331318
Total Releases
361 lbs
Chemicals Reported
3
Latest Report Year
2023

Compare this facility

See how Taber Extrusions LLC stacks up against nearby facilities and the typical reporter.

Total reported releases
Taber Extrusions LLC
361 lbs
Clean Harbors el Dorado LLC
16.6M lbs

100% less than the comparison

Chemicals reported
Taber Extrusions LLC
3
Clean Harbors el Dorado LLC
251

99% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Taber Extrusions LLC releases toxic chemicals into the environment. Total: 361 lbs.

Off-site Transfers 154 lbs (42.8%)
Air Releases 130 lbs (36.1%)
Water Discharges 76 lbs (21.1%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 57% (123 lbs to 53 lbs).

Reported total releases by year

Taber Extrusions LLC - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 123 lbs 2
2020 84 lbs 2
2021 47 lbs 2
2022 54 lbs 2
2023 53 lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). Sorted by total release volume.

Chemical Total Flags
Zinc compounds 190 lbs -
Copper compounds 144 lbs -
Copper And Copper Compounds 26 lbs -

Location

Coordinates
35.2703, -93.1029
ZIP Code
72802
EPA Facility ID
72801TBRMT915SO

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Taber Extrusions LLC release?
Taber Extrusions LLC has reported releases of 3 chemicals to the EPA Toxic Release Inventory, totaling 361 lbs.
What industry is Taber Extrusions LLC in?
Taber Extrusions LLC is classified under the "Primary Metals" industry (NAICS code 331318), located in Russellville, AR.
How long has Taber Extrusions LLC reported to the TRI?
Taber Extrusions LLC has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Taber Extrusions LLC release toxic chemicals?
The primary release pathway for Taber Extrusions LLC is off-site transfers, accounting for 42.8% of total releases (154 lbs). Secondary pathway: air releases (36.1%).
Are emissions from Taber Extrusions LLC increasing or decreasing?
From 2019 to 2023, total releases decreased by 57%, from 123 lbs to 53 lbs.
Is Taber Extrusions LLC a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Taber Extrusions LLC are rising or falling over time. View trends
  • This facility ranks #15,177 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Arkansas's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Arkansas profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Taber Extrusions LLC. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.