EPA TRI Facility · Fabricated Metals
Armtec Defense Technologies
Coachella, CA · Parent: Transdigm Inc
- Total releases
- 7.7K lbs
- Chemicals reported
- 4
- Carcinogens
- 1
- Primary pathway
- Air Releases
Armtec Defense Technologies is an EPA Toxics Release Inventory reporter in Coachella, CA, in the fabricated metals sector. It reported 7.7K lbs of releases across 4 chemicals in 2023. That ranks 10,432 of 25,986 TRI facilities nationwide by reported pounds. Reported volume rose against 2022. Pounds reported are not a measure of toxicity or health risk.
Armtec Defense Technologies has reported 7.7K lbs of toxic releases across 4 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 25% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.
Where this facility sits in the TRI record
Among the 3,421 Fabricated Metals facilities in this database, Armtec Defense Technologies reports the 1,250th-largest volume (7.7K lbs). Its reported volume is concentrated rather than spread: Xylene (mixed isomers) alone is 73.2% of the total.
Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.
Armtec Defense Technologies files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332994 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 7.7K lbs in cumulative toxic releases across 4 distinct chemicals, 1 of which (25%) carry a carcinogenic classification.
The dominant release pathway is air releases at 7.7K lbs (100.0% of total volume). Between 2019 and 2023, reported totals increased by 28% - from 1.7K lbs to 2.1K lbs. The facility is operated under parent company Transdigm Inc.
TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Armtec Defense Technologies has filed with the EPA under federal community right-to-know requirements.
Annual disclosure change
What changed: EPA TRI 2023 reporting year
- Armtec Defense Technologies's total reported releases rose from 1.4 thousand lb in 2022 to 2.1 thousand lb in 2023, based on EPA TRI filings.
- Armtec Defense Technologies's air releases rose from 1.4 thousand lb in 2022 to 2.1 thousand lb in 2023, based on EPA TRI filings.
Quick Facts
Compare this facility
See how Armtec Defense Technologies stacks up against nearby facilities and the typical reporter.
95% less than the comparison
33% more than the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Armtec Defense Technologies releases toxic chemicals into the environment. Total: 7.7K lbs.
Emissions Trend Summary
From 2019 to 2023, total releases increased by 28% (1.7K lbs to 2.1K lbs).
Reported total releases by year
Armtec Defense Technologies - annual TRI totals
- 2019 0
2019
0 million lbs
- 2020 0
2020
0 million lbs
- 2021 0
2021
0 million lbs
- 2022 0
2022
0 million lbs
- 2023 0
2023
0 million lbs
What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 1.7K lbs | 4 |
| 2020 | 1.6K lbs | 3 |
| 2021 | 887 lbs | 3 |
| 2022 | 1.4K lbs | 3 |
| 2023 | 2.1K lbs | 3 |
Chemical Releases
Aggregated across all reporting years (2019–2023). 1 of 4 chemicals are carcinogens. Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Xylene (mixed isomers) | 5.6K lbs | - |
| Ethylbenzene | 1.6K lbs | Carcinogen |
| n-Hexane | 453 lbs | - |
| Methanol | 3 lbs | - |
Location
Nearest TRI Facilities to Armtec Defense Technologies
The closest other reporting facilities in California, ordered by distance.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.
Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.
PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.
Frequently Asked Questions
What chemicals does Armtec Defense Technologies release? ▼
What industry is Armtec Defense Technologies in? ▼
How long has Armtec Defense Technologies reported to the TRI? ▼
How does Armtec Defense Technologies release toxic chemicals? ▼
Are emissions from Armtec Defense Technologies increasing or decreasing? ▼
Is Armtec Defense Technologies a health risk? ▼
Does Armtec Defense Technologies release carcinogens? ▼
Explore More Data for California
What to do with this facility's data
Use this facility profile as a starting point, then check how it compares.
- See whether releases reported by Armtec Defense Technologies are rising or falling over time. View trends
- This facility ranks #10,432 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
- Check California's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View California profile
TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.
Read our methodology - how this data is sourced, computed, and verified.
Related
Sources & how this page was built
Every figure on this page traces to public, federal-government data on Armtec Defense Technologies. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program, chemical & reporting reference - what each chemical is and how releases are counted. epa.gov
- EPA Facility Registry Service (FRS) - authoritative facility location and identity. epa.gov
- EPA Enforcement & Compliance History Online (ECHO) - regulatory and compliance context. echo.epa.gov
- EPA Envirofacts - the EPA data warehouse that exposes these datasets. enviro.epa.gov
Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.
According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.