EPA TRI Facility · Furniture

Cabinetworks Group Mt. Sterling

Mount Sterling, KY · Parent: Cabinetworks Group Michigan LLC

Total releases
118.3K lbs
Chemicals reported
2
Latest report
2023
Primary pathway
Air Releases
Verify at EPA TRI →

Cabinetworks Group Mt. Sterling has reported 118.3K lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Furniture sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#4,232 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Cabinetworks Group Mt. Sterling files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 337110 (Furniture). Across 5 years of records spanning 2019–2023, the site has disclosed 118.3K lbs in cumulative toxic releases across 2 distinct chemicals.

The dominant release pathway is air releases at 118.3K lbs (100.0% of total volume). Between 2019 and 2023, reported totals decreased by 98% - from 31.2K lbs to 660 lbs. The facility is operated under parent company Cabinetworks Group Michigan LLC.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Cabinetworks Group Mt. Sterling has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Furniture
NAICS Code
337110
Total Releases
118.3K lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how Cabinetworks Group Mt. Sterling stacks up against nearby facilities and the typical reporter.

Total reported releases
Cabinetworks Group Mt. Sterling
118.3K lbs
North American Stainless
35.2M lbs

100% less than the comparison

Chemicals reported
Cabinetworks Group Mt. Sterling
2
North American Stainless
15

87% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Cabinetworks Group Mt. Sterling releases toxic chemicals into the environment. Total: 118.3K lbs.

Air Releases 118.3K lbs (100.0%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 98% (31.2K lbs to 660 lbs).

Reported total releases by year

Cabinetworks Group Mt. Sterling - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 31.2K lbs 1
2020 40.9K lbs 2
2021 44.8K lbs 2
2022 801 lbs 2
2023 660 lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). Sorted by total release volume.

Chemical Total Flags
Xylene (mixed isomers) 93.0K lbs -
Certain glycol ethers 25.4K lbs -

Location

Coordinates
38.0927, -83.9005
ZIP Code
40353
EPA Facility ID
40353QLTYC51CLA

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Cabinetworks Group Mt. Sterling release?
Cabinetworks Group Mt. Sterling has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 118.3K lbs.
What industry is Cabinetworks Group Mt. Sterling in?
Cabinetworks Group Mt. Sterling is classified under the "Furniture" industry (NAICS code 337110), located in Mount Sterling, KY.
How long has Cabinetworks Group Mt. Sterling reported to the TRI?
Cabinetworks Group Mt. Sterling has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Cabinetworks Group Mt. Sterling release toxic chemicals?
The primary release pathway for Cabinetworks Group Mt. Sterling is air releases, accounting for 100.0% of total releases (118.3K lbs).
Are emissions from Cabinetworks Group Mt. Sterling increasing or decreasing?
From 2019 to 2023, total releases decreased by 98%, from 31.2K lbs to 660 lbs.
Is Cabinetworks Group Mt. Sterling a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Cabinetworks Group Mt. Sterling are rising or falling over time. View trends
  • This facility ranks #4,232 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Kentucky's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Kentucky profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Cabinetworks Group Mt. Sterling. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.