EPA TRI Facility · Fabricated Metals

Gulf Coast Marine Fabricators Inc.

Abbeville, LA

Total releases
323 lbs
Chemicals reported
2
Latest report
2023
Primary pathway
Air Releases
Verify at EPA TRI →

Gulf Coast Marine Fabricators Inc. has reported 323 lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 99% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#15,298 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Gulf Coast Marine Fabricators Inc. files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332312 (Fabricated Metals). Across 2 years of records spanning 2022–2023, the site has disclosed 323 lbs in cumulative toxic releases across 2 distinct chemicals.

The dominant release pathway is air releases at 319 lbs (98.8% of total volume), followed by off-site transfers at 1.2%. Between 2022 and 2023, reported totals held roughly flat - from 162 lbs to 162 lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Gulf Coast Marine Fabricators Inc. has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332312
Total Releases
323 lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how Gulf Coast Marine Fabricators Inc. stacks up against nearby facilities and the typical reporter.

Total reported releases
Gulf Coast Marine Fabricators Inc.
323 lbs
Bayer Cropscience LP
81.9M lbs

100% less than the comparison

Chemicals reported
Gulf Coast Marine Fabricators Inc.
2
Bayer Cropscience LP
17

88% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Gulf Coast Marine Fabricators Inc. releases toxic chemicals into the environment. Total: 323 lbs.

Air Releases 319 lbs (98.8%)
Off-site Transfers 4 lbs (1.2%)
View 2-Year Emissions Trend →

Emissions Trend Summary

From 2022 to 2023, total releases held roughly flat (162 lbs to 162 lbs).

Reported total releases by year

Gulf Coast Marine Fabricators Inc. - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2022 162 lbs 2
2023 162 lbs 2

Chemical Releases

Aggregated across all reporting years (2022–2023). Sorted by total release volume.

Chemical Total Flags
Zinc compounds 304 lbs -
Lead And Lead Compounds 19 lbs -

Location

Coordinates
29.8944, -92.1195
ZIP Code
70510
EPA Facility ID
7051WGLFCS5ENGI

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Gulf Coast Marine Fabricators Inc. release?
Gulf Coast Marine Fabricators Inc. has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 323 lbs.
What industry is Gulf Coast Marine Fabricators Inc. in?
Gulf Coast Marine Fabricators Inc. is classified under the "Fabricated Metals" industry (NAICS code 332312), located in Abbeville, LA.
How long has Gulf Coast Marine Fabricators Inc. reported to the TRI?
Gulf Coast Marine Fabricators Inc. has EPA Toxic Release Inventory data spanning 2 years, from 2022 to 2023.
How does Gulf Coast Marine Fabricators Inc. release toxic chemicals?
The primary release pathway for Gulf Coast Marine Fabricators Inc. is air releases, accounting for 98.8% of total releases (319 lbs). Secondary pathway: off-site transfers (1.2%).
Are emissions from Gulf Coast Marine Fabricators Inc. increasing or decreasing?
From 2022 to 2023, total releases held roughly flat, from 162 lbs to 162 lbs.
Is Gulf Coast Marine Fabricators Inc. a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Gulf Coast Marine Fabricators Inc. are rising or falling over time. View trends
  • This facility ranks #15,298 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Louisiana's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Louisiana profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Gulf Coast Marine Fabricators Inc.. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.