EPA TRI Facility · Fabricated Metals
Curtis Metal Finishing Co
Sterling Heights, MI
- Total releases
- 233.0K lbs
- Chemicals reported
- 7
- Latest report
- 2023
- Primary pathway
- Off-site Transfers
Curtis Metal Finishing Co is an EPA Toxics Release Inventory reporter in Sterling Heights, MI, in the fabricated metals sector. It reported 56.5K lbs of releases across 5 chemicals in 2023, and 233.0K lbs in total across its 2019-2023 reporting years. That ranks 3,021 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. Reported volume rose against 2022. Pounds reported are not a measure of toxicity or health risk.
Curtis Metal Finishing Co has reported 233.0K lbs of toxic releases across 7 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 82% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.
Where this facility sits in the TRI record
Among the 3,421 Fabricated Metals facilities in this database, Curtis Metal Finishing Co reports the 242nd-largest volume, placing it in the top 7.1% of its sector.
Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.
Curtis Metal Finishing Co files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332812 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 233.0K lbs in cumulative toxic releases across 7 distinct chemicals.
The dominant release pathway is off-site transfers at 191.5K lbs (82.2% of total volume), followed by air releases at 17.8%. Between 2019 and 2023, reported totals decreased by 11% - from 63.6K lbs to 56.5K lbs.
TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Curtis Metal Finishing Co has filed with the EPA under federal community right-to-know requirements.
Annual disclosure change
What changed: EPA TRI 2023 reporting year
- Curtis Metal Finishing Co's total reported releases rose from 53.0 thousand lb in 2022 to 56.5 thousand lb in 2023, based on EPA TRI filings.
- Curtis Metal Finishing Co's air releases rose from 8.7 thousand lb in 2022 to 13.2 thousand lb in 2023, based on EPA TRI filings.
- Curtis Metal Finishing Co's chemicals reported fell from 6 in 2022 to 5 in 2023, based on EPA TRI filings.
- Curtis Metal Finishing Co's off-site transfers fell from 44.3 thousand lb in 2022 to 43.3 thousand lb in 2023, based on EPA TRI filings.
Quick Facts
Compare this facility
See how Curtis Metal Finishing Co stacks up against nearby facilities and the typical reporter.
18564218.0× more than the comparison
3.5× more than the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Curtis Metal Finishing Co releases toxic chemicals into the environment. Total: 233.0K lbs.
Emissions Trend Summary
From 2019 to 2023, total releases decreased by 11% (63.6K lbs to 56.5K lbs).
Reported total releases by year
Curtis Metal Finishing Co - annual TRI totals
- 2019 0
2019
0 million lbs
- 2020 0
2020
0 million lbs
- 2021 0
2021
0 million lbs
- 2022 0
2022
0 million lbs
- 2023 0
2023
0 million lbs
What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 63.6K lbs | 5 |
| 2020 | 26.4K lbs | 5 |
| 2021 | 33.4K lbs | 6 |
| 2022 | 53.0K lbs | 6 |
| 2023 | 56.5K lbs | 5 |
Chemical Releases
Aggregated across all reporting years (2019–2023). Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Nitrate compounds (water dissociable; reportable only when in aqueous solution) | 102.3K lbs | - |
| Zinc compounds | 63.8K lbs | - |
| Certain glycol ethers | 46.0K lbs | - |
| Manganese compounds | 10.7K lbs | - |
| n-Butyl alcohol | 9.6K lbs | - |
| Manganese And Manganese Compounds | 606 lbs | - |
| Nitric acid | 0 lbs | - |
Location
Nearest TRI Facilities to Curtis Metal Finishing Co
The closest other reporting facilities in Michigan, ordered by distance.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.
Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.
PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.
Frequently Asked Questions
What chemicals does Curtis Metal Finishing Co release? ▼
What industry is Curtis Metal Finishing Co in? ▼
How long has Curtis Metal Finishing Co reported to the TRI? ▼
How does Curtis Metal Finishing Co release toxic chemicals? ▼
Are emissions from Curtis Metal Finishing Co increasing or decreasing? ▼
Is Curtis Metal Finishing Co a health risk? ▼
Explore More Data for Michigan
What to do with this facility's data
Use this facility profile as a starting point, then check how it compares.
- See whether releases reported by Curtis Metal Finishing Co are rising or falling over time. View trends
- This facility ranks #3,021 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
- Check Michigan's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Michigan profile
TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.
Read our methodology - how this data is sourced, computed, and verified.
Related
Sources & how this page was built
Every figure on this page traces to public, federal-government data on Curtis Metal Finishing Co. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program, chemical & reporting reference - what each chemical is and how releases are counted. epa.gov
- EPA Facility Registry Service (FRS) - authoritative facility location and identity. epa.gov
- EPA Enforcement & Compliance History Online (ECHO) - regulatory and compliance context. echo.epa.gov
- EPA Envirofacts - the EPA data warehouse that exposes these datasets. enviro.epa.gov
Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.
According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.