EPA TRI Facility · Fabricated Metals

Plastic Plate Inc-Monroe Plant

Grand Rapids, MI · Parent: Lacks Enterprises Inc

Total releases
63.2K lbs
Chemicals reported
6
Carcinogens
2
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Plastic Plate Inc-Monroe Plant has reported 63.2K lbs of toxic releases across 6 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 2 are classified as carcinogens, representing 33% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 68% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#5,600 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Plastic Plate Inc-Monroe Plant files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332813 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 63.2K lbs in cumulative toxic releases across 6 distinct chemicals, 2 of which (33%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 42.7K lbs (67.6% of total volume), followed by air releases at 32.4%. Between 2019 and 2023, reported totals decreased by 71% - from 28.6K lbs to 8.4K lbs. The facility is operated under parent company Lacks Enterprises Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Plastic Plate Inc-Monroe Plant has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332813
Total Releases
63.2K lbs
Chemicals Reported
6
Latest Report Year
2023

Compare this facility

See how Plastic Plate Inc-Monroe Plant stacks up against nearby facilities and the typical reporter.

Total reported releases
Plastic Plate Inc-Monroe Plant
63.2K lbs
Cleveland-Cliffs Steel Corp Dearborn Works
53.0M lbs

100% less than the comparison

Chemicals reported
Plastic Plate Inc-Monroe Plant
6
Cleveland-Cliffs Steel Corp Dearborn Works
17

65% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Plastic Plate Inc-Monroe Plant releases toxic chemicals into the environment. Total: 63.2K lbs.

Off-site Transfers 42.7K lbs (67.6%)
Air Releases 20.5K lbs (32.4%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 71% (28.6K lbs to 8.4K lbs).

Reported total releases by year

Plastic Plate Inc-Monroe Plant - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 28.6K lbs 6
2020 8.2K lbs 5
2021 9.5K lbs 5
2022 8.4K lbs 5
2023 8.4K lbs 5

Chemical Releases

Aggregated across all reporting years (2019–2023). 2 of 6 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 28.1K lbs -
Methanol 21.5K lbs -
Nickel And Nickel Compounds 7.9K lbs Carcinogen
Copper And Copper Compounds 3.7K lbs -
Nitric acid 1.9K lbs -
Lead 10 lbs Carcinogen

Location

Coordinates
42.9929, -85.6705
ZIP Code
49505
EPA Facility ID
49503PLSTC1648M

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Plastic Plate Inc-Monroe Plant release?
Plastic Plate Inc-Monroe Plant has reported releases of 6 chemicals to the EPA Toxic Release Inventory, totaling 63.2K lbs. 2 of these (33%) are classified as carcinogens.
What industry is Plastic Plate Inc-Monroe Plant in?
Plastic Plate Inc-Monroe Plant is classified under the "Fabricated Metals" industry (NAICS code 332813), located in Grand Rapids, MI.
How long has Plastic Plate Inc-Monroe Plant reported to the TRI?
Plastic Plate Inc-Monroe Plant has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Plastic Plate Inc-Monroe Plant release toxic chemicals?
The primary release pathway for Plastic Plate Inc-Monroe Plant is off-site transfers, accounting for 67.6% of total releases (42.7K lbs). Secondary pathway: air releases (32.4%).
Are emissions from Plastic Plate Inc-Monroe Plant increasing or decreasing?
From 2019 to 2023, total releases decreased by 71%, from 28.6K lbs to 8.4K lbs.
Is Plastic Plate Inc-Monroe Plant a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Plastic Plate Inc-Monroe Plant release carcinogens?
Yes, Plastic Plate Inc-Monroe Plant reports 2 chemicals classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Plastic Plate Inc-Monroe Plant are rising or falling over time. View trends
  • This facility ranks #5,600 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Michigan's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Michigan profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Plastic Plate Inc-Monroe Plant. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.