EPA TRI Facility · Fabricated Metals

Bodycote Syracuse Heat Treating Corp.

Syracuse, NY · Parent: Bodycote Thermal Processing Inc

Total releases
4.0K lbs
Chemicals reported
1
Latest report
2023
Primary pathway
Air Releases

Bodycote Syracuse Heat Treating Corp. is an EPA Toxics Release Inventory reporter in Syracuse, NY, in the fabricated metals sector. It reported 2.0K lbs of releases across 1 chemical in 2024, and 4.0K lbs in total across its 2021-2024 reporting years. That ranks 11,587 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. Reported volume fell against 2022. Pounds reported are not a measure of toxicity or health risk.

View saved records
Verify at EPA TRI →

Bodycote Syracuse Heat Treating Corp. has reported 4.0K lbs of toxic releases across 1 chemical to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#11,587 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Where this facility sits in the TRI record

Among the 3,421 Fabricated Metals facilities in this database, Bodycote Syracuse Heat Treating Corp. reports the 1,411th-largest volume (4.0K lbs). Its reported volume is concentrated rather than spread: Ammonia alone is 100% of the total.

Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.

Bodycote Syracuse Heat Treating Corp. files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332811 (Fabricated Metals). Across 4 years of records spanning 2021–2024, the site has disclosed 4.0K lbs in cumulative toxic releases across 1 distinct chemical.

The dominant release pathway is air releases at 6.0K lbs (100.0% of total volume). Between 2021 and 2024, reported totals increased by 65% - from 1.2K lbs to 2.0K lbs. The facility is operated under parent company Bodycote Thermal Processing Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Bodycote Syracuse Heat Treating Corp. has filed with the EPA under federal community right-to-know requirements.

Annual disclosure change

What changed: EPA TRI 2023 reporting year

2022 → 2023
  • Bodycote Syracuse Heat Treating Corp.'s total reported releases fell from 1.5 thousand lb in 2022 to 1.3 thousand lb in 2023, based on EPA TRI filings.
  • Bodycote Syracuse Heat Treating Corp.'s air releases fell from 1.5 thousand lb in 2022 to 1.3 thousand lb in 2023, based on EPA TRI filings.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332811
Total Releases
4.0K lbs
Chemicals Reported
1
Latest Report Year
2023

Compare this facility

See how Bodycote Syracuse Heat Treating Corp. stacks up against nearby facilities and the typical reporter.

Total reported releases
Bodycote Syracuse Heat Treating Corp.
4.0K lbs
Lockheed Martin Corp
1.9K lbs

2.1× more than the comparison

Chemicals reported
Bodycote Syracuse Heat Treating Corp.
1
Lockheed Martin Corp
2

50% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Bodycote Syracuse Heat Treating Corp. releases toxic chemicals into the environment. Total: 6.0K lbs.

Air Releases 6.0K lbs (100.0%)
View 4-Year Emissions Trend →

Emissions Trend Summary

From 2021 to 2024, total releases increased by 65% (1.2K lbs to 2.0K lbs).

Reported total releases by year

Bodycote Syracuse Heat Treating Corp. - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2021 1.2K lbs 1
2022 1.5K lbs 1
2023 1.3K lbs 1
2024 2.0K lbs 1

Chemical Releases

Aggregated across all reporting years (2021–2024). Sorted by total release volume.

Chemical Total Flags
Ammonia 6.0K lbs -

Location

Coordinates
43.1116, -76.2519
ZIP Code
13209
EPA Facility ID
1320WBDYCT8DWIG

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Bodycote Syracuse Heat Treating Corp. release?
Bodycote Syracuse Heat Treating Corp. has reported releases of 1 chemical to the EPA Toxic Release Inventory, totaling 4.0K lbs.
What industry is Bodycote Syracuse Heat Treating Corp. in?
Bodycote Syracuse Heat Treating Corp. is classified under the "Fabricated Metals" industry (NAICS code 332811), located in Syracuse, NY.
How long has Bodycote Syracuse Heat Treating Corp. reported to the TRI?
Bodycote Syracuse Heat Treating Corp. has EPA Toxic Release Inventory data spanning 4 years, from 2021 to 2024.
How does Bodycote Syracuse Heat Treating Corp. release toxic chemicals?
The primary release pathway for Bodycote Syracuse Heat Treating Corp. is air releases, accounting for 100.0% of total releases (6.0K lbs).
Are emissions from Bodycote Syracuse Heat Treating Corp. increasing or decreasing?
From 2021 to 2024, total releases increased by 65%, from 1.2K lbs to 2.0K lbs.
Is Bodycote Syracuse Heat Treating Corp. a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Bodycote Syracuse Heat Treating Corp. are rising or falling over time. View trends
  • This facility ranks #11,587 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check New York's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View New York profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Bodycote Syracuse Heat Treating Corp.. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.