EPA TRI Facility · Primary Metals

Advanced Cast Products Inc

Meadville, PA · Parent: Grede Holdings LLC

Total releases
492.8K lbs
Chemicals reported
4
Carcinogens
1
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Advanced Cast Products Inc has reported 492.8K lbs of toxic releases across 4 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 25% of the facility's chemical profile. The facility operates in the Primary Metals sector. The primary release pathway is off-site transfers, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#1,974 of 25,902 TRI facilities nationwide by total reported releases - among the top 7.6% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk.

Advanced Cast Products Inc files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331511 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 492.8K lbs in cumulative toxic releases across 4 distinct chemicals, 1 of which (25%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 491.7K lbs (99.8% of total volume), followed by air releases at 0.2%. Between 2019 and 2023, reported totals increased by 21% - from 76.7K lbs to 92.9K lbs. The facility is operated under parent company Grede Holdings LLC.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Advanced Cast Products Inc has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331511
Total Releases
492.8K lbs
Chemicals Reported
4
Latest Report Year
2023

Compare this facility

See how Advanced Cast Products Inc stacks up against nearby facilities and the typical reporter.

Total reported releases
Advanced Cast Products Inc
492.8K lbs
Max Environmental -- Yukon Facility
34.8M lbs

99% less than the comparison

Chemicals reported
Advanced Cast Products Inc
4
Max Environmental -- Yukon Facility
18

78% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Advanced Cast Products Inc releases toxic chemicals into the environment. Total: 492.8K lbs.

Off-site Transfers 491.7K lbs (99.8%)
Air Releases 1.2K lbs (0.2%)
Water Discharges 7 lbs (<0.1%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 21% (76.7K lbs to 92.9K lbs).

Reported total releases by year

Advanced Cast Products Inc - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 76.7K lbs 4
2020 59.8K lbs 4
2021 87.1K lbs 4
2022 176.3K lbs 4
2023 92.9K lbs 4

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 4 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Sodium nitrite 436.2K lbs -
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 33.4K lbs -
Copper 18.0K lbs -
Lead 5.3K lbs Carcinogen

Location

Coordinates
41.6272, -80.1630
ZIP Code
16335
EPA Facility ID
16335DVNCDPOBOX

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Advanced Cast Products Inc release?
Advanced Cast Products Inc has reported releases of 4 chemicals to the EPA Toxic Release Inventory, totaling 492.8K lbs. 1 of these (25%) are classified as carcinogens.
What industry is Advanced Cast Products Inc in?
Advanced Cast Products Inc is classified under the "Primary Metals" industry (NAICS code 331511), located in Meadville, PA.
How long has Advanced Cast Products Inc reported to the TRI?
Advanced Cast Products Inc has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Advanced Cast Products Inc release toxic chemicals?
The primary release pathway for Advanced Cast Products Inc is off-site transfers, accounting for 99.8% of total releases (491.7K lbs). Secondary pathway: air releases (0.2%).
Are emissions from Advanced Cast Products Inc increasing or decreasing?
From 2019 to 2023, total releases increased by 21%, from 76.7K lbs to 92.9K lbs.
Is Advanced Cast Products Inc a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Advanced Cast Products Inc release carcinogens?
Yes, Advanced Cast Products Inc reports 1 chemical classified as carcinogens, representing 25% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Advanced Cast Products Inc are rising or falling over time. View trends
  • This facility ranks #1,974 of 25,902 TRI facilities nationwide by total reported releases - among the top 7.6% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Pennsylvania's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Pennsylvania profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Advanced Cast Products Inc. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.