EPA TRI Facility · Fabricated Metals

Ati Precision Finishing LLC - Monaca

Monaca, PA · Parent: Ati Inc

Total releases
6.7K lbs
Chemicals reported
3
Carcinogens
1
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Ati Precision Finishing LLC - Monaca has reported 6.7K lbs of toxic releases across 3 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 33% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 94% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#10,618 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Ati Precision Finishing LLC - Monaca files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332312 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 6.7K lbs in cumulative toxic releases across 3 distinct chemicals, 1 of which (33%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 6.4K lbs (94.2% of total volume), followed by air releases at 5.8%. Between 2019 and 2023, reported totals decreased by 39% - from 1.8K lbs to 1.1K lbs. The facility is operated under parent company Ati Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Ati Precision Finishing LLC - Monaca has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332312
Total Releases
6.7K lbs
Chemicals Reported
3
Latest Report Year
2023

Compare this facility

See how Ati Precision Finishing LLC - Monaca stacks up against nearby facilities and the typical reporter.

Total reported releases
Ati Precision Finishing LLC - Monaca
6.7K lbs
Max Environmental -- Yukon Facility
34.8M lbs

100% less than the comparison

Chemicals reported
Ati Precision Finishing LLC - Monaca
3
Max Environmental -- Yukon Facility
18

83% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Ati Precision Finishing LLC - Monaca releases toxic chemicals into the environment. Total: 6.7K lbs.

Off-site Transfers 6.4K lbs (94.2%)
Air Releases 388 lbs (5.8%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 39% (1.8K lbs to 1.1K lbs).

Reported total releases by year

Ati Precision Finishing LLC - Monaca - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 1.8K lbs 3
2020 1.4K lbs 3
2021 620 lbs 3
2022 1.9K lbs 3
2023 1.1K lbs 3

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 3 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nickel And Nickel Compounds 2.7K lbs Carcinogen
Manganese 2.5K lbs -
Chromium and Chromium Compounds(except for chromite ore mined in the Transvaal Region) 1.5K lbs -

Location

Coordinates
40.6849, -80.2675
ZIP Code
15061
EPA Facility ID
15061RMMTL27PEN

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Ati Precision Finishing LLC - Monaca release?
Ati Precision Finishing LLC - Monaca has reported releases of 3 chemicals to the EPA Toxic Release Inventory, totaling 6.7K lbs. 1 of these (33%) are classified as carcinogens.
What industry is Ati Precision Finishing LLC - Monaca in?
Ati Precision Finishing LLC - Monaca is classified under the "Fabricated Metals" industry (NAICS code 332312), located in Monaca, PA.
How long has Ati Precision Finishing LLC - Monaca reported to the TRI?
Ati Precision Finishing LLC - Monaca has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Ati Precision Finishing LLC - Monaca release toxic chemicals?
The primary release pathway for Ati Precision Finishing LLC - Monaca is off-site transfers, accounting for 94.2% of total releases (6.4K lbs). Secondary pathway: air releases (5.8%).
Are emissions from Ati Precision Finishing LLC - Monaca increasing or decreasing?
From 2019 to 2023, total releases decreased by 39%, from 1.8K lbs to 1.1K lbs.
Is Ati Precision Finishing LLC - Monaca a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Ati Precision Finishing LLC - Monaca release carcinogens?
Yes, Ati Precision Finishing LLC - Monaca reports 1 chemical classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Ati Precision Finishing LLC - Monaca are rising or falling over time. View trends
  • This facility ranks #10,618 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Pennsylvania's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Pennsylvania profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Ati Precision Finishing LLC - Monaca. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.