EPA TRI Facility · Nonmetallic Mineral Product
Scan Pac Manufacturing Inc
Magnolia, TX
- Total releases
- 5.9K lbs
- Chemicals reported
- 1
- Latest report
- 2021
- Primary pathway
- Air Releases
Reported-total composition
How the reported total is distributed
5.9K lbs across all reported pathways
- Air Releases 5.9K lbs 100.0%
The segments reconcile to the cumulative total shown above. Off-site transfers are shown separately from releases to air, water, and land.
LIGHT volume AIR pathway CLEAN
Scan Pac Manufacturing Inc is an EPA Toxics Release Inventory reporter in Magnolia, TX, in the nonmetallic mineral product sector. It reported 2.0K lbs of releases across 1 chemical in 2021, and 5.9K lbs in total across its 2019-2021 reporting years. That ranks 10,880 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In Texas's 2,016 reporting TRI sites, pounds #1 is not chemical-count #1. Scan Pac Manufacturing Inc is pounds #1045 and chemical-count #1623 at 5.9K lbs. Ascend Performance Materials-Chocolate Bayou Plant leads reported pounds (94.0M lbs) at 36 chemicals (chemical-count #35). Veolia Es Technical Solutions LLC Port Arthur Facility leads chemical count at 246 chemicals (1.5M lbs, pounds #112). Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Heidelberg Materials - Magnolia Rmc; R&b Ready Mix; Tomball Plant; Daikin Comfort Technologies Manufacturing L.P.. Similar-scale Nonmetallic Mineral Product peers outside Texas: US Brick; Agama Glass Technologies LLC; American Rock Products Hermiston; Ervin Technologies. Largest disclosed chemicals by pounds: Xylene (mixed isomers).
Scan Pac Manufacturing Inc has reported 5.9K lbs of toxic releases across 1 chemical to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Nonmetallic Mineral Product sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.
Scan Pac Manufacturing Inc vs. every reporting TRI facility
Cumulative reported release pounds, with this facility marked in the national distribution
5.9K lbs Top 42% higher than 58% of 25,986 reporting TRI facilities
Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.
Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year
Where this facility sits in the TRI record
Among the 3,265 Nonmetallic Mineral Product facilities in this database, Scan Pac Manufacturing Inc reports the 425th-largest volume, placing it in the top 13% of its sector. Its reported volume is concentrated rather than spread: Xylene (mixed isomers) alone is 100% of the total.
Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.
Quick Facts
Compare this facility
See how Scan Pac Manufacturing Inc stacks up against nearby facilities and the typical reporter.
182561.0× more than the comparison
About the same as the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Scan Pac Manufacturing Inc releases toxic chemicals into the environment. Total: 5.9K lbs.
Emissions Trend Summary
From 2019 to 2021, total releases increased by 1% (2.0K lbs to 2.0K lbs).
Reported total releases by year
Scan Pac Manufacturing Inc - annual TRI totals
- 2019 0
- 2020 0
- 2021 0
What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 2.0K lbs | 1 |
| 2020 | 2.0K lbs | 1 |
| 2021 | 2.0K lbs | 1 |
Chemical Releases
Aggregated across all reporting years (2019–2021). Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Xylene (mixed isomers) | 5.9K lbs | - |
Location
Nearest TRI Facilities to Scan Pac Manufacturing Inc
Closest other reporters in Texas - including Heidelberg Materials - Magnolia Rmc, R&b Ready Mix, Tomball Plant, ordered by distance.
Showing 8 of 2,015 other reporting facilities in Texas.
Similar Nonmetallic Mineral Product Facilities
Other Nonmetallic Mineral Product facilities with similar total release volumes (±80%), outside Texas - e.g. US Brick, Agama Glass Technologies LLC, American Rock Products Hermiston.
Compare beyond Texas
Nationwide peers by reported pounds & chemical count
Cross-state TRI reporters nearest Scan Pac Manufacturing Inc on cumulative reported pounds (5.9K lbs) and distinct chemical count (1). Release-pound peers include Inland Die Casting, Phillips 66 Jefferson City Terminal, Spectrum Laboratory Products Inc.. Chemical-count peers include Ecoelectrica LP, Planta Penuelas, Tallaboa Puerto Rico LLC. Neighborhoods are forced disjoint so each axis surfaces a different set of sites.
Similar reported release pounds
Nearest out-of-state reporters (≥1,000 lbs) by absolute TRI pounds, not same-industry or same-county neighbors.
- Inland Die Casting Wheeling, IL · Primary Metals 5.9K lbs reported
- Phillips 66 Jefferson City Terminal Jefferson City, MO · Petroleum Bulk Terminals 5.9K lbs reported
- Spectrum Laboratory Products Inc. Gardena, CA · Chemical Wholesalers 5.9K lbs reported
- US Brick Columbia, SC · Nonmetallic Mineral Product 5.9K lbs reported
Similar chemical count
Nearest out-of-state reporters by distinct Form-R chemicals (deduped against the release-pound neighborhood).
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
On this page the largest disclosed chemicals include Xylene (mixed isomers); nearby reporters include Heidelberg Materials - Magnolia Rmc. Scan Pac Manufacturing Inc stamps LIGHT volume · AIR pathway · CLEAN carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.
Use and verify this record
This Scan Pac Manufacturing Inc record combines EPA TRI filings, facility identity, and compliance context without turning reported releases into a health-risk rating.
TRI release totals are self-reported estimates, not measured stack emissions. The methodology explains how records are joined, computed, and refreshed.
PlainEnviro renders public EPA records directly from its data pipeline; no figure on this page is typed in by an editor. See the editorial standards and corrections policy for how source changes and reported errors are handled.
All federal data sources used on this page
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
- EPA Facility Registry Service - facility location and identity. epa.gov
- EPA ECHO - regulatory and compliance context. epa.gov
- EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov