EPA TRI Facility · Plastics and Rubber

Sunlite Plastics

Germantown, WI

Total releases
750 lbs
Chemicals reported
1
Carcinogens
1
Primary pathway
Air Releases
Verify at EPA TRI →

Sunlite Plastics has reported 750 lbs of toxic releases across 1 chemical to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 100% of the facility's chemical profile. The facility operates in the Plastics and Rubber sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#14,265 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Sunlite Plastics files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 326199 (Plastics and Rubber). Across 5 years of records spanning 2019–2023, the site has disclosed 750 lbs in cumulative toxic releases across 1 distinct chemical, 1 of which (100%) carry a carcinogenic classification.

The dominant release pathway is air releases at 750 lbs (100.0% of total volume).

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Sunlite Plastics has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Plastics and Rubber
NAICS Code
326199
Total Releases
750 lbs
Chemicals Reported
1
Latest Report Year
2023

Compare this facility

See how Sunlite Plastics stacks up against nearby facilities and the typical reporter.

Total reported releases
Sunlite Plastics
750 lbs
Mullins Cheese Inc
11.2M lbs

100% less than the comparison

Chemicals reported
Sunlite Plastics
1
Mullins Cheese Inc
3

67% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Sunlite Plastics releases toxic chemicals into the environment. Total: 750 lbs.

Air Releases 750 lbs (100.0%)
View 5-Year Emissions Trend →

Emissions Trend Summary

Reported total releases by year

Sunlite Plastics - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 0 lbs 1
2020 500 lbs 1
2021 250 lbs 1
2022 0 lbs 1
2023 0 lbs 1

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 1 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Di(2-ethylhexyl) phthalate 750 lbs Carcinogen

Location

Coordinates
43.2243, -88.1497
ZIP Code
53022
EPA Facility ID
53022SNLTPW194N

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Sunlite Plastics release?
Sunlite Plastics has reported releases of 1 chemical to the EPA Toxic Release Inventory, totaling 750 lbs. 1 of these (100%) are classified as carcinogens.
What industry is Sunlite Plastics in?
Sunlite Plastics is classified under the "Plastics and Rubber" industry (NAICS code 326199), located in Germantown, WI.
How long has Sunlite Plastics reported to the TRI?
Sunlite Plastics has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Sunlite Plastics release toxic chemicals?
The primary release pathway for Sunlite Plastics is air releases, accounting for 100.0% of total releases (750 lbs).
Is Sunlite Plastics a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Sunlite Plastics release carcinogens?
Yes, Sunlite Plastics reports 1 chemical classified as carcinogens, representing 100% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Sunlite Plastics are rising or falling over time. View trends
  • This facility ranks #14,265 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Wisconsin's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Wisconsin profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Sunlite Plastics. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.