EPA TRI Facility · Primary Metals

Pacific Alloy Castings

South Gate, CA

Total releases
20.6K lbs
Chemicals reported
2
Carcinogens
1
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Pacific Alloy Castings has reported 20.6K lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 50% of the facility's chemical profile. The facility operates in the Primary Metals sector. The primary release pathway is off-site transfers, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#8,181 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Pacific Alloy Castings files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331511 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 20.6K lbs in cumulative toxic releases across 2 distinct chemicals, 1 of which (50%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 20.6K lbs (99.8% of total volume), followed by air releases at 0.2%. Between 2019 and 2023, reported totals increased by 128% - from 2.7K lbs to 6.3K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Pacific Alloy Castings has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331511
Total Releases
20.6K lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how Pacific Alloy Castings stacks up against nearby facilities and the typical reporter.

Total reported releases
Pacific Alloy Castings
20.6K lbs
Clean Harbors Buttonwillow LLC
50.4M lbs

100% less than the comparison

Chemicals reported
Pacific Alloy Castings
2
Clean Harbors Buttonwillow LLC
45

96% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Pacific Alloy Castings releases toxic chemicals into the environment. Total: 20.6K lbs.

Off-site Transfers 20.6K lbs (99.8%)
Air Releases 36 lbs (0.2%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 128% (2.7K lbs to 6.3K lbs).

Reported total releases by year

Pacific Alloy Castings - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 2.7K lbs 2
2020 2.7K lbs 2
2021 3.7K lbs 2
2022 5.3K lbs 2
2023 6.3K lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 2 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Chromium 16.3K lbs -
Nickel 4.3K lbs Carcinogen

Location

Coordinates
33.9485, -118.1601
ZIP Code
90280
EPA Facility ID
90280PCFCL5900E

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Pacific Alloy Castings release?
Pacific Alloy Castings has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 20.6K lbs. 1 of these (50%) are classified as carcinogens.
What industry is Pacific Alloy Castings in?
Pacific Alloy Castings is classified under the "Primary Metals" industry (NAICS code 331511), located in South Gate, CA.
How long has Pacific Alloy Castings reported to the TRI?
Pacific Alloy Castings has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Pacific Alloy Castings release toxic chemicals?
The primary release pathway for Pacific Alloy Castings is off-site transfers, accounting for 99.8% of total releases (20.6K lbs). Secondary pathway: air releases (0.2%).
Are emissions from Pacific Alloy Castings increasing or decreasing?
From 2019 to 2023, total releases increased by 128%, from 2.7K lbs to 6.3K lbs.
Is Pacific Alloy Castings a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Pacific Alloy Castings release carcinogens?
Yes, Pacific Alloy Castings reports 1 chemical classified as carcinogens, representing 50% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Pacific Alloy Castings are rising or falling over time. View trends
  • This facility ranks #8,181 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check California's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View California profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Pacific Alloy Castings. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.