EPA TRI Facility · Transportation Equipment

P&h Manufacturing

Shelbyville, IL

Total releases
221 lbs
Chemicals reported
3
Carcinogens
1
Primary pathway
Air Releases
Verify at EPA TRI →

P&h Manufacturing has reported 221 lbs of toxic releases across 3 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 33% of the facility's chemical profile. The facility operates in the Transportation Equipment sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#15,749 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

P&h Manufacturing files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 336212 (Transportation Equipment). Across 4 years of records spanning 2019–2022, the site has disclosed 221 lbs in cumulative toxic releases across 3 distinct chemicals, 1 of which (33%) carry a carcinogenic classification.

The dominant release pathway is air releases at 221 lbs (100.0% of total volume). Between 2019 and 2022, reported totals increased by 14% - from 56 lbs to 64 lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that P&h Manufacturing has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Transportation Equipment
NAICS Code
336212
Total Releases
221 lbs
Chemicals Reported
3
Latest Report Year
2022

Compare this facility

See how P&h Manufacturing stacks up against nearby facilities and the typical reporter.

Total reported releases
P&h Manufacturing
221 lbs
Prairie State Generating Co
37.9M lbs

100% less than the comparison

Chemicals reported
P&h Manufacturing
3
Prairie State Generating Co
31

90% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How P&h Manufacturing releases toxic chemicals into the environment. Total: 221 lbs.

Air Releases 221 lbs (100.0%)
View 4-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2022, total releases increased by 14% (56 lbs to 64 lbs).

Reported total releases by year

P&h Manufacturing - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 56 lbs 3
2020 42 lbs 3
2021 59 lbs 3
2022 64 lbs 3

Chemical Releases

Aggregated across all reporting years (2019–2022). 1 of 3 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Manganese 221 lbs -
Chromium 0 lbs -
Nickel 0 lbs Carcinogen

Location

Coordinates
39.4027, -88.7996
ZIP Code
62565
EPA Facility ID
62565PHMFG604SL

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does P&h Manufacturing release?
P&h Manufacturing has reported releases of 3 chemicals to the EPA Toxic Release Inventory, totaling 221 lbs. 1 of these (33%) are classified as carcinogens.
What industry is P&h Manufacturing in?
P&h Manufacturing is classified under the "Transportation Equipment" industry (NAICS code 336212), located in Shelbyville, IL.
How long has P&h Manufacturing reported to the TRI?
P&h Manufacturing has EPA Toxic Release Inventory data spanning 4 years, from 2019 to 2022.
How does P&h Manufacturing release toxic chemicals?
The primary release pathway for P&h Manufacturing is air releases, accounting for 100.0% of total releases (221 lbs).
Are emissions from P&h Manufacturing increasing or decreasing?
From 2019 to 2022, total releases increased by 14%, from 56 lbs to 64 lbs.
Is P&h Manufacturing a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does P&h Manufacturing release carcinogens?
Yes, P&h Manufacturing reports 1 chemical classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by P&h Manufacturing are rising or falling over time. View trends
  • This facility ranks #15,749 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Illinois's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Illinois profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on P&h Manufacturing. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.