EPA TRI Facility · Plastics and Rubber
Psi Molded Plastics
South Bend, IN · Parent: Psi Molded Plastics Inc.
- Total releases
- 1.5K lbs
- Chemicals reported
- 2
- Carcinogens
- 1
- Primary pathway
- Off-site Transfers
OFFSITE Form-R mix
Psi Molded Plastics: how the 1.5K lbs splits
1.5K lbs across all reported pathways
- Off-site Transfers 1.5K lbs 100.0%
Psi Molded Plastics's 1.5K lbs Form-R total is OFFSITE - off-site transfers is 100.0% of the bar. Off-site transfers stay separate from air, water, and land releases. Leading chemical by pounds: Styrene.
Carcinogen-classified pounds vs other reported pounds
Same cumulative TRI total as above, split by EPA/IARC carcinogen classification on each chemical: pounds share, not chemical count. Classification is not a site health-risk score.
LIGHT volume OFFSITE pathway CARC-HEAVY
Psi Molded Plastics is an EPA Toxics Release Inventory reporter in South Bend, IN, in the plastics and rubber sector. It reported 585 lbs of releases across 1 chemical in 2022, and 1.5K lbs in total across its 2021-2022 reporting years. That ranks 13,262 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In Indiana's 871 reporting TRI sites, pounds #1 is not chemical-count #1. Psi Molded Plastics is pounds #582 and chemical-count #579 at 1.5K lbs. Uss Gary Works leads reported pounds (77.4M lbs) at 36 chemicals (chemical-count #9). Tradebe Treatment & Recycling LLC leads chemical count at 98 chemicals (11.9M lbs, pounds #12). Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Modineer - Hoosier Tank; Pioneer Metal Finishing LLC; Imagineering Enterprises LLC; Honeywell Aerospace South Bend. Similar-scale Plastics and Rubber peers outside Indiana: Diversified Structural Composites; Fxi Inc. - Santa Teresa; Elite Comfort Solutions; American Renolit Corp La. Largest disclosed chemicals by pounds: Styrene; Antimony compounds.
Psi Molded Plastics stamps LIGHT volume with a dominant OFFSITE pathway (100.0% off-site transfers) across 2 chemicals · 1 carcinogen-classified. Cumulative Form-R extract: 1.5K lbs (2021–2022). All figures are self-reported EPCRA §313 estimates, not measured stack emissions or a health-risk score. Scale peers include Diversified Structural Composites and Fxi Inc. - Santa Teresa.
Psi Molded Plastics vs. every reporting TRI facility
Cumulative reported release pounds, with this facility marked in the national distribution
1.5K lbs 49th percentile higher than 49% of 25,986 reporting TRI facilities
Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.
Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year
Psi Molded Plastics: Styrene-led volume
Among the 1,504 Plastics and Rubber facilities in this database, Psi Molded Plastics reports the 1,006th-largest volume (1.5K lbs). Its reported volume is concentrated rather than spread: Styrene alone is 60.5% of the total. Carcinogen-classified chemicals make up 60.5% of the reported pounds, not just of the chemical count. Scale peers outside Indiana include Diversified Structural Composites and Fxi Inc. - Santa Teresa.
Concentrated means ≥60% of Psi Molded Plastics's pounds in one chemical - here Styrene at 60.5%. Not a toxicity score.
Psi Molded Plastics Form-R facts
Compare this facility
See how Psi Molded Plastics stacks up against nearby facilities and the typical reporter.
277.2× more than the comparison
33% less than the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Psi Molded Plastics releases toxic chemicals into the environment. Total: 1.5K lbs.
Emissions Trend Summary
From 2021 to 2022, total releases decreased by 35% (895 lbs to 585 lbs).
Psi Molded Plastics: annual Form-R pounds
LIGHT site · OFFSITE pathway · TRI years 2021–2022
- 2021 0
- 2022 0
What this shows Psi Molded Plastics year-over-year reported totals (decreased by 35% from 2021 to 2022). TRI figures are self-reported estimates and can swing with production, waste handling, and reporting changes, not only with controls. Lead chemical in the extract: Styrene.
| Year | Total | Chemicals |
|---|---|---|
| 2021 | 895 lbs | 1 |
| 2022 | 585 lbs | 1 |
Chemical Releases
Aggregated across all reporting years (2021–2022). 1 of 2 chemicals are carcinogens. Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Styrene | 895 lbs | Carcinogen |
| Antimony compounds | 585 lbs | - |
Psi Molded Plastics · OFFSITE-pathway site
Nearest TRI Facilities to Psi Molded Plastics
Closest other reporters in Indiana - including Modineer - Hoosier Tank, Pioneer Metal Finishing LLC, Imagineering Enterprises LLC, ordered by distance.
Showing 8 of 870 other reporting facilities in Indiana.
Similar Plastics and Rubber Facilities
Other Plastics and Rubber facilities with similar total release volumes (±80%), outside Indiana - e.g. Diversified Structural Composites, Fxi Inc. - Santa Teresa, Elite Comfort Solutions.
Compare beyond Indiana
Nationwide peers by reported pounds & chemical count
Cross-state TRI reporters nearest Psi Molded Plastics on cumulative reported pounds (1.5K lbs) and distinct chemical count (2). Release-pound peers include Luxottica Optical Manufacturing N.a. Dallas, Dhf Technical Products LLC, Polychemie Inc.. Chemical-count peers include Idi Caribe Inc, Suiza Dairy Corp, Edwards Lifesciences Technology Sarl. Neighborhoods are forced disjoint so each axis surfaces a different set of sites.
Similar reported release pounds
Nearest out-of-state reporters (≥1,000 lbs) by absolute TRI pounds, not same-industry or same-county neighbors.
- Luxottica Optical Manufacturing N.a. Dallas Dallas, TX · Miscellaneous Manufacturing 1.5K lbs reported
- Dhf Technical Products LLC Rio Rancho, NM · Primary Metals 1.5K lbs reported
- Polychemie Inc. Taylor, PA · Chemicals 1.5K lbs reported
- Virginia Concrete Spotsylvania Plant Fredericksburg, VA · Nonmetallic Mineral Product 1.5K lbs reported
Similar chemical count
Nearest out-of-state reporters by distinct Form-R chemicals (deduped against the release-pound neighborhood).
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
On this page the largest disclosed chemicals include Styrene, Antimony compounds; nearby reporters include Modineer - Hoosier Tank. Psi Molded Plastics stamps LIGHT volume · OFFSITE pathway · CARC-HEAVY carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.
Use and verify this record
This Psi Molded Plastics TRI extract (LIGHT · OFFSITE · CARC-HEAVY · lead Styrene) joins EPA Form-R filings with facility identity - reported pounds, not a health-risk rating.
Psi Molded Plastics totals are self-reported EPCRA §313 estimates for South Bend, IN, latest year 2022. Form-R rows span 2021–2022 (2 years). NAICS 326199 · Plastics and Rubber. 0.1% of St. Joseph TRI pounds in this extract. Nearest ABS peer: Luxottica Optical Manufacturing N.a. Dallas (Δ 0 lbs). Pounds ≠ exposure.
Psi Molded Plastics stamps LIGHT volume · OFFSITE pathway · CARC-HEAVY · lead Styrene. PlainEnviro renders this EPA Form-R extract from its pipeline; no figure is typed in by an editor. Corrections: editorial policy.
All federal data sources used on this page
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
- EPA Facility Registry Service - facility location and identity. epa.gov
- EPA ECHO - regulatory and compliance context. epa.gov
- EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov