EPA TRI Facility · Fabricated Metals

Giese Manufacturing

Dubuque, IA

Total releases
32 lbs
Chemicals reported
4
Carcinogens
2
Primary pathway
Air Releases
Verify at EPA TRI →

Giese Manufacturing has reported 32 lbs of toxic releases across 4 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 2 are classified as carcinogens, representing 50% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 70% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#17,599 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Giese Manufacturing files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332999 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 32 lbs in cumulative toxic releases across 4 distinct chemicals, 2 of which (50%) carry a carcinogenic classification.

The dominant release pathway is air releases at 22 lbs (70.1% of total volume), followed by water discharges at 29.9%. Between 2019 and 2023, reported totals increased by 17% - from 6 lbs to 7 lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Giese Manufacturing has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332999
Total Releases
32 lbs
Chemicals Reported
4
Latest Report Year
2023

Compare this facility

See how Giese Manufacturing stacks up against nearby facilities and the typical reporter.

Total reported releases
Giese Manufacturing
32 lbs
Climax Molybdenum Co
16.4M lbs

100% less than the comparison

Chemicals reported
Giese Manufacturing
4
Climax Molybdenum Co
5

20% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Giese Manufacturing releases toxic chemicals into the environment. Total: 32 lbs.

Air Releases 22 lbs (70.1%)
Water Discharges 10 lbs (29.9%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 17% (6 lbs to 7 lbs).

Reported total releases by year

Giese Manufacturing - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 6 lbs 4
2020 5 lbs 4
2021 7 lbs 4
2022 7 lbs 4
2023 7 lbs 4

Chemical Releases

Aggregated across all reporting years (2019–2023). 2 of 4 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Manganese 21 lbs -
Chromium 8 lbs -
Nickel 3 lbs Carcinogen
Lead 0 lbs Carcinogen

Location

Coordinates
42.4916, -90.7704
ZIP Code
52002
EPA Facility ID
5200WGSMNF725CH

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Giese Manufacturing release?
Giese Manufacturing has reported releases of 4 chemicals to the EPA Toxic Release Inventory, totaling 32 lbs. 2 of these (50%) are classified as carcinogens.
What industry is Giese Manufacturing in?
Giese Manufacturing is classified under the "Fabricated Metals" industry (NAICS code 332999), located in Dubuque, IA.
How long has Giese Manufacturing reported to the TRI?
Giese Manufacturing has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Giese Manufacturing release toxic chemicals?
The primary release pathway for Giese Manufacturing is air releases, accounting for 70.1% of total releases (22 lbs). Secondary pathway: water discharges (29.9%).
Are emissions from Giese Manufacturing increasing or decreasing?
From 2019 to 2023, total releases increased by 17%, from 6 lbs to 7 lbs.
Is Giese Manufacturing a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Giese Manufacturing release carcinogens?
Yes, Giese Manufacturing reports 2 chemicals classified as carcinogens, representing 50% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Giese Manufacturing are rising or falling over time. View trends
  • This facility ranks #17,599 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Iowa's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Iowa profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Giese Manufacturing. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.