EPA TRI Facility · Plastics and Rubber

Camso Manufacturing USA Ltd Junction City Div

Junction City, KS · Parent: Michelin N.a. Inc

Total releases
53.2K lbs
Chemicals reported
2
Latest report
2023
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Camso Manufacturing USA Ltd Junction City Div has reported 53.2K lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Plastics and Rubber sector. The primary release pathway is off-site transfers, accounting for 99% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#5,994 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Camso Manufacturing USA Ltd Junction City Div files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 326291 (Plastics and Rubber). Across 4 years of records spanning 2020–2023, the site has disclosed 53.2K lbs in cumulative toxic releases across 2 distinct chemicals.

The dominant release pathway is off-site transfers at 52.7K lbs (99.1% of total volume), followed by air releases at 0.9%. Between 2020 and 2023, reported totals decreased by 90% - from 5.6K lbs to 588 lbs. The facility is operated under parent company Michelin N.a. Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Camso Manufacturing USA Ltd Junction City Div has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Plastics and Rubber
NAICS Code
326291
Total Releases
53.2K lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how Camso Manufacturing USA Ltd Junction City Div stacks up against nearby facilities and the typical reporter.

Total reported releases
Camso Manufacturing USA Ltd Junction City Div
53.2K lbs
Ecovyst Catalyst Technologies LLC
19.3M lbs

100% less than the comparison

Chemicals reported
Camso Manufacturing USA Ltd Junction City Div
2
Ecovyst Catalyst Technologies LLC
9

78% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Camso Manufacturing USA Ltd Junction City Div releases toxic chemicals into the environment. Total: 53.2K lbs.

Off-site Transfers 52.7K lbs (99.1%)
Air Releases 492 lbs (0.9%)
View 4-Year Emissions Trend →

Emissions Trend Summary

From 2020 to 2023, total releases decreased by 90% (5.6K lbs to 588 lbs).

Reported total releases by year

Camso Manufacturing USA Ltd Junction City Div - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2020 5.6K lbs 1
2021 20.0K lbs 1
2022 27.0K lbs 1
2023 588 lbs 2

Chemical Releases

Aggregated across all reporting years (2020–2023). Sorted by total release volume.

Chemical Total Flags
Zinc compounds 52.6K lbs -
Sodium nitrite 560 lbs -

Location

Coordinates
38.9956, -96.8679
ZIP Code
66441
EPA Facility ID
6644WCMSMN2925I

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Camso Manufacturing USA Ltd Junction City Div release?
Camso Manufacturing USA Ltd Junction City Div has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 53.2K lbs.
What industry is Camso Manufacturing USA Ltd Junction City Div in?
Camso Manufacturing USA Ltd Junction City Div is classified under the "Plastics and Rubber" industry (NAICS code 326291), located in Junction City, KS.
How long has Camso Manufacturing USA Ltd Junction City Div reported to the TRI?
Camso Manufacturing USA Ltd Junction City Div has EPA Toxic Release Inventory data spanning 4 years, from 2020 to 2023.
How does Camso Manufacturing USA Ltd Junction City Div release toxic chemicals?
The primary release pathway for Camso Manufacturing USA Ltd Junction City Div is off-site transfers, accounting for 99.1% of total releases (52.7K lbs). Secondary pathway: air releases (0.9%).
Are emissions from Camso Manufacturing USA Ltd Junction City Div increasing or decreasing?
From 2020 to 2023, total releases decreased by 90%, from 5.6K lbs to 588 lbs.
Is Camso Manufacturing USA Ltd Junction City Div a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Camso Manufacturing USA Ltd Junction City Div are rising or falling over time. View trends
  • This facility ranks #5,994 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Kansas's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Kansas profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Camso Manufacturing USA Ltd Junction City Div. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.