EPA TRI Facility · Fabricated Metals

Mw Components - Baltimore

Essex, MD · Parent: Mw Industries Inc

Total releases
260 lbs
Chemicals reported
3
Carcinogens
1
Primary pathway
Air Releases
Verify at EPA TRI →

Mw Components - Baltimore has reported 260 lbs of toxic releases across 3 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 33% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 53% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#15,520 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Mw Components - Baltimore files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332613 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 260 lbs in cumulative toxic releases across 3 distinct chemicals, 1 of which (33%) carry a carcinogenic classification.

The dominant release pathway is air releases at 139 lbs (53.5% of total volume), followed by off-site transfers at 46.5%. Between 2019 and 2023, reported totals decreased by 34% - from 157 lbs to 103 lbs. The facility is operated under parent company Mw Industries Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Mw Components - Baltimore has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332613
Total Releases
260 lbs
Chemicals Reported
3
Latest Report Year
2023

Compare this facility

See how Mw Components - Baltimore stacks up against nearby facilities and the typical reporter.

Total reported releases
Mw Components - Baltimore
260 lbs
Darling Ingredients Inc.- Linkwood Facility
9.1M lbs

100% less than the comparison

Chemicals reported
Mw Components - Baltimore
3
Darling Ingredients Inc.- Linkwood Facility
4

25% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Mw Components - Baltimore releases toxic chemicals into the environment. Total: 260 lbs.

Air Releases 139 lbs (53.5%)
Off-site Transfers 121 lbs (46.5%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 34% (157 lbs to 103 lbs).

Reported total releases by year

Mw Components - Baltimore - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 157 lbs 3
2020 0 lbs 1
2021 0 lbs 1
2022 0 lbs 1
2023 103 lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 3 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Methanol 103 lbs -
Nickel 79 lbs Carcinogen
Chromium 78 lbs -

Location

Coordinates
39.3376, -76.4708
ZIP Code
21221
EPA Facility ID
2122WMRYLN89KEL

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Mw Components - Baltimore release?
Mw Components - Baltimore has reported releases of 3 chemicals to the EPA Toxic Release Inventory, totaling 260 lbs. 1 of these (33%) are classified as carcinogens.
What industry is Mw Components - Baltimore in?
Mw Components - Baltimore is classified under the "Fabricated Metals" industry (NAICS code 332613), located in Essex, MD.
How long has Mw Components - Baltimore reported to the TRI?
Mw Components - Baltimore has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Mw Components - Baltimore release toxic chemicals?
The primary release pathway for Mw Components - Baltimore is air releases, accounting for 53.5% of total releases (139 lbs). Secondary pathway: off-site transfers (46.5%).
Are emissions from Mw Components - Baltimore increasing or decreasing?
From 2019 to 2023, total releases decreased by 34%, from 157 lbs to 103 lbs.
Is Mw Components - Baltimore a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Mw Components - Baltimore release carcinogens?
Yes, Mw Components - Baltimore reports 1 chemical classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Mw Components - Baltimore are rising or falling over time. View trends
  • This facility ranks #15,520 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Maryland's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Maryland profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Mw Components - Baltimore. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.