EPA TRI Facility · Nonmetallic Mineral Product

Proform Finishing Products - Belcamp

Belcamp, MD · Parent: Spangler Cos Inc

Total releases
371 lbs
Chemicals reported
3
Carcinogens
1
Primary pathway
Air Releases
Verify at EPA TRI →

Proform Finishing Products - Belcamp has reported 371 lbs of toxic releases across 3 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 33% of the facility's chemical profile. The facility operates in the Nonmetallic Mineral Product sector. The primary release pathway is air releases, accounting for 60% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#15,150 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Proform Finishing Products - Belcamp files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 327420 (Nonmetallic Mineral Product). Across 5 years of records spanning 2019–2023, the site has disclosed 371 lbs in cumulative toxic releases across 3 distinct chemicals, 1 of which (33%) carry a carcinogenic classification.

The dominant release pathway is air releases at 224 lbs (60.4% of total volume), followed by off-site transfers at 39.5%. Between 2019 and 2023, reported totals increased by 273% - from 49 lbs to 183 lbs. The facility is operated under parent company Spangler Cos Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Proform Finishing Products - Belcamp has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Nonmetallic Mineral Product
NAICS Code
327420
Total Releases
371 lbs
Chemicals Reported
3
Latest Report Year
2023

Compare this facility

See how Proform Finishing Products - Belcamp stacks up against nearby facilities and the typical reporter.

Total reported releases
Proform Finishing Products - Belcamp
371 lbs
Darling Ingredients Inc.- Linkwood Facility
9.1M lbs

100% less than the comparison

Chemicals reported
Proform Finishing Products - Belcamp
3
Darling Ingredients Inc.- Linkwood Facility
4

25% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Proform Finishing Products - Belcamp releases toxic chemicals into the environment. Total: 371 lbs.

Air Releases 224 lbs (60.4%)
Off-site Transfers 147 lbs (39.5%)
Water Discharges 0 lbs (0.1%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 273% (49 lbs to 183 lbs).

Reported total releases by year

Proform Finishing Products - Belcamp - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 49 lbs 2
2020 49 lbs 2
2021 45 lbs 2
2022 46 lbs 2
2023 183 lbs 3

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 3 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Vinyl acetate 305 lbs Carcinogen
Lead compounds 65 lbs -
Zinc compounds 1 lbs -

Location

Coordinates
39.4791, -76.2275
ZIP Code
21017
EPA Facility ID
21017NWNGC4611M

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Proform Finishing Products - Belcamp release?
Proform Finishing Products - Belcamp has reported releases of 3 chemicals to the EPA Toxic Release Inventory, totaling 371 lbs. 1 of these (33%) are classified as carcinogens.
What industry is Proform Finishing Products - Belcamp in?
Proform Finishing Products - Belcamp is classified under the "Nonmetallic Mineral Product" industry (NAICS code 327420), located in Belcamp, MD.
How long has Proform Finishing Products - Belcamp reported to the TRI?
Proform Finishing Products - Belcamp has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Proform Finishing Products - Belcamp release toxic chemicals?
The primary release pathway for Proform Finishing Products - Belcamp is air releases, accounting for 60.4% of total releases (224 lbs). Secondary pathway: off-site transfers (39.5%).
Are emissions from Proform Finishing Products - Belcamp increasing or decreasing?
From 2019 to 2023, total releases increased by 273%, from 49 lbs to 183 lbs.
Is Proform Finishing Products - Belcamp a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Proform Finishing Products - Belcamp release carcinogens?
Yes, Proform Finishing Products - Belcamp reports 1 chemical classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Proform Finishing Products - Belcamp are rising or falling over time. View trends
  • This facility ranks #15,150 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Maryland's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Maryland profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Proform Finishing Products - Belcamp. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.