EPA TRI Facility · Plastics and Rubber
Tulip Molded Plastics LLC
Niagara Falls, NY · Parent: Edison Group Cos LLC
- Total releases
- 385.4K lbs
- Chemicals reported
- 2
- Latest report
- 2023
- Primary pathway
- Off-site Transfers
Reported-total composition
How the reported total is distributed
404.4K lbs across all reported pathways
- Off-site Transfers 404.4K lbs 100.0%
The segments reconcile to the cumulative total shown above. Off-site transfers are shown separately from releases to air, water, and land.
MID volume OFFSITE pathway CLEAN
Tulip Molded Plastics LLC is an EPA Toxics Release Inventory reporter in Niagara Falls, NY, in the plastics and rubber sector. It reported 19.0K lbs of releases across 1 chemical in 2024, and 385.4K lbs in total across its 2021-2024 reporting years. That ranks 2,251 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In New York's 581 reporting TRI sites, pounds #1 is not chemical-count #1. Tulip Molded Plastics LLC is pounds #41 and chemical-count #247 at 385.4K lbs. St Lawrence Zinc Co Balmat 4 Mine & Mill leads reported pounds (9.7M lbs) at 10 chemicals (chemical-count #40). Norlite LLC leads chemical count at 93 chemicals (28.3K lbs, pounds #152). Reported volume rose against 2022. Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Imerys Fused Minerals; Flame Control Coatings,llc; Harbisonwalker International Steelcasting USA; Olin Corp. Similar-scale Plastics and Rubber peers outside New York: Charter Next Generation - Rhinelander; Contitech USA LLC; Contemporary Products of Texas Inc; Royal Baths Manufacturing Co. Other Edison Group Cos LLC sites in this extract: Garfield Facility LLC; Stryten Salina LLC; Forest City Facility LLC; Gnb Fort Smith LLC. Largest disclosed chemicals by pounds: Lead And Lead Compounds; Lead compounds.
Tulip Molded Plastics LLC has reported 385.4K lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Plastics and Rubber sector. The primary release pathway is off-site transfers, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.
Tulip Molded Plastics LLC vs. every reporting TRI facility
Cumulative reported release pounds, with this facility marked in the national distribution
385K lbs Top 9% higher than 91% of 25,986 reporting TRI facilities
Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.
Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year
Where this facility sits in the TRI record
Among the 1,504 Plastics and Rubber facilities in this database, Tulip Molded Plastics LLC reports the 113th-largest volume, placing it in the top 7.5% of its sector. Its reported volume is concentrated rather than spread: Lead And Lead Compounds alone is 69.3% of the total.
Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.
Annual disclosure change
What changed: EPA TRI 2023 reporting year
- Tulip Molded Plastics LLC's total reported releases rose from 116.5 thousand lb in 2022 to 124.2 thousand lb in 2023, based on EPA TRI filings.
- Tulip Molded Plastics LLC's off-site transfers rose from 116.5 thousand lb in 2022 to 124.2 thousand lb in 2023, based on EPA TRI filings.
Quick Facts
Compare this facility
See how Tulip Molded Plastics LLC stacks up against nearby facilities and the typical reporter.
38538.9× more than the comparison
2.0× more than the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Tulip Molded Plastics LLC releases toxic chemicals into the environment. Total: 404.4K lbs.
Emissions Trend Summary
From 2021 to 2024, total releases decreased by 87% (144.6K lbs to 19.0K lbs).
Reported total releases by year
Tulip Molded Plastics LLC - annual TRI totals
- 2021 0
- 2022 0
- 2023 0
- 2024 0
What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.
| Year | Total | Chemicals |
|---|---|---|
| 2021 | 144.6K lbs | 1 |
| 2022 | 116.5K lbs | 1 |
| 2023 | 124.2K lbs | 1 |
| 2024 | 19.0K lbs | 1 |
Chemical Releases
Aggregated across all reporting years (2021–2024). Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Lead And Lead Compounds | 280.2K lbs | - |
| Lead compounds | 124.2K lbs | - |
Location
Nearest TRI Facilities to Tulip Molded Plastics LLC
Closest other reporters in New York - including Imerys Fused Minerals, Flame Control Coatings,llc, Harbisonwalker International Steelcasting USA, ordered by distance.
Showing 8 of 580 other reporting facilities in New York.
Similar Plastics and Rubber Facilities
Other Plastics and Rubber facilities with similar total release volumes (±80%), outside New York - e.g. Charter Next Generation - Rhinelander, Contitech USA LLC, Contemporary Products of Texas Inc.
Compare beyond New York
Nationwide peers by reported pounds & chemical count
Cross-state TRI reporters nearest Tulip Molded Plastics LLC on cumulative reported pounds (385.4K lbs) and distinct chemical count (2). Release-pound peers include 3M Co - Wausau Downtown, Cannon-Muskegon, Gcc Permian LLC - Odessa Cement Plant. Chemical-count peers include Idi Caribe Inc, Suiza Dairy Corp, Edwards Lifesciences Technology Sarl. Neighborhoods are forced disjoint so each axis surfaces a different set of sites.
Similar reported release pounds
Nearest out-of-state reporters (≥1,000 lbs) by absolute TRI pounds, not same-industry or same-county neighbors.
- 3M Co - Wausau Downtown Wausau, WI · Nonmetallic Mineral Product 385.7K lbs reported
- Cannon-Muskegon Muskegon, MI · Primary Metals 385.0K lbs reported
- Gcc Permian LLC - Odessa Cement Plant Odessa, TX · Nonmetallic Mineral Product 384.8K lbs reported
- Mars Wrigley US LLC Elizabethtown, PA · Food 386.0K lbs reported
Similar chemical count
Nearest out-of-state reporters by distinct Form-R chemicals (deduped against the release-pound neighborhood).
Other Edison Group Cos LLC Facilities
Same-parent TRI sites ranked by reported releases - including Garfield Facility LLC, Stryten Salina LLC, Forest City Facility LLC.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
On this page the largest disclosed chemicals include Lead And Lead Compounds, Lead compounds; nearby reporters include Imerys Fused Minerals. Tulip Molded Plastics LLC stamps MID volume · OFFSITE pathway · CLEAN carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.
Use and verify this record
This Tulip Molded Plastics LLC record combines EPA TRI filings, facility identity, and compliance context without turning reported releases into a health-risk rating.
TRI release totals are self-reported estimates, not measured stack emissions. The methodology explains how records are joined, computed, and refreshed.
PlainEnviro renders public EPA records directly from its data pipeline; no figure on this page is typed in by an editor. See the editorial standards and corrections policy for how source changes and reported errors are handled.
All federal data sources used on this page
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
- EPA Facility Registry Service - facility location and identity. epa.gov
- EPA ECHO - regulatory and compliance context. epa.gov
- EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov