EPA TRI Facility · Electrical Equipment

Ametek Solidstate Controls

Columbus, OH · Parent: Ametek Inc

Total releases
545 lbs
Chemicals reported
2
Carcinogens
1
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Ametek Solidstate Controls has reported 545 lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 50% of the facility's chemical profile. The facility operates in the Electrical Equipment sector. The primary release pathway is off-site transfers, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#14,666 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Ametek Solidstate Controls files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 335999 (Electrical Equipment). Across 5 years of records spanning 2019–2023, the site has disclosed 545 lbs in cumulative toxic releases across 2 distinct chemicals, 1 of which (50%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 545 lbs (100.0% of total volume). Between 2019 and 2023, reported totals held roughly flat - from 109 lbs to 109 lbs. The facility is operated under parent company Ametek Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Ametek Solidstate Controls has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Electrical Equipment
NAICS Code
335999
Total Releases
545 lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how Ametek Solidstate Controls stacks up against nearby facilities and the typical reporter.

Total reported releases
Ametek Solidstate Controls
545 lbs
Ineos Nitriles USA LLC
42.4M lbs

100% less than the comparison

Chemicals reported
Ametek Solidstate Controls
2
Ineos Nitriles USA LLC
31

94% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Ametek Solidstate Controls releases toxic chemicals into the environment. Total: 545 lbs.

Off-site Transfers 545 lbs (100.0%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases held roughly flat (109 lbs to 109 lbs).

Reported total releases by year

Ametek Solidstate Controls - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 109 lbs 2
2020 109 lbs 2
2021 109 lbs 2
2022 109 lbs 2
2023 109 lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 2 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Copper 545 lbs -
Lead 0 lbs Carcinogen

Location

Coordinates
40.1144, -82.9928
ZIP Code
43085
EPA Facility ID
43085MTKSL875DE

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Ametek Solidstate Controls release?
Ametek Solidstate Controls has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 545 lbs. 1 of these (50%) are classified as carcinogens.
What industry is Ametek Solidstate Controls in?
Ametek Solidstate Controls is classified under the "Electrical Equipment" industry (NAICS code 335999), located in Columbus, OH.
How long has Ametek Solidstate Controls reported to the TRI?
Ametek Solidstate Controls has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Ametek Solidstate Controls release toxic chemicals?
The primary release pathway for Ametek Solidstate Controls is off-site transfers, accounting for 100.0% of total releases (545 lbs).
Are emissions from Ametek Solidstate Controls increasing or decreasing?
From 2019 to 2023, total releases held roughly flat, from 109 lbs to 109 lbs.
Is Ametek Solidstate Controls a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Ametek Solidstate Controls release carcinogens?
Yes, Ametek Solidstate Controls reports 1 chemical classified as carcinogens, representing 50% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Ametek Solidstate Controls are rising or falling over time. View trends
  • This facility ranks #14,666 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Ohio's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Ohio profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Ametek Solidstate Controls. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.