EPA TRI Facility · Primary Metals

Ametek Specialty Metal Products Div

Wallingford, CT · Parent: Ametek Inc

Total releases
150.4K lbs
Chemicals reported
9
Carcinogens
5
Primary pathway
Air Releases
Verify at EPA TRI →

Ametek Specialty Metal Products Div has reported 150.4K lbs of toxic releases across 9 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 5 are classified as carcinogens, representing 56% of the facility's chemical profile. The facility operates in the Primary Metals sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#3,749 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Ametek Specialty Metal Products Div files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331491 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 150.4K lbs in cumulative toxic releases across 9 distinct chemicals, 5 of which (56%) carry a carcinogenic classification.

The dominant release pathway is air releases at 150.4K lbs (100.0% of total volume), followed by water discharges at 0.0%. Between 2019 and 2023, reported totals decreased by 29% - from 36.0K lbs to 25.5K lbs. The facility is operated under parent company Ametek Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Ametek Specialty Metal Products Div has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331491
Total Releases
150.4K lbs
Chemicals Reported
9
Latest Report Year
2023

Compare this facility

See how Ametek Specialty Metal Products Div stacks up against nearby facilities and the typical reporter.

Total reported releases
Ametek Specialty Metal Products Div
150.4K lbs
Clean Harbors of Connecticut Inc
1.5M lbs

90% less than the comparison

Chemicals reported
Ametek Specialty Metal Products Div
9
Clean Harbors of Connecticut Inc
15

40% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Ametek Specialty Metal Products Div releases toxic chemicals into the environment. Total: 150.4K lbs.

Air Releases 150.4K lbs (100.0%)
Water Discharges 5 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 29% (36.0K lbs to 25.5K lbs).

Reported total releases by year

Ametek Specialty Metal Products Div - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 36.0K lbs 5
2020 30.8K lbs 5
2021 33.4K lbs 5
2022 24.7K lbs 5
2023 25.5K lbs 5

Chemical Releases

Aggregated across all reporting years (2019–2023). 5 of 9 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Trichloroethylene 146.5K lbs Carcinogen
Cobalt compounds 1.1K lbs Carcinogen
Cobalt And Cobalt Compounds 872 lbs Carcinogen
Copper compounds 558 lbs -
Copper And Copper Compounds 554 lbs -
Chromium compounds (except for chromite ore mined in the Transvaal Region) 500 lbs -
Chromium and Chromium Compounds(except for chromite ore mined in the Transvaal Region) 260 lbs -
Nickel compounds 17 lbs Carcinogen
Nickel And Nickel Compounds 9 lbs Carcinogen

Location

Coordinates
41.4291, -72.8406
ZIP Code
06492
EPA Facility ID
06492MTKNC21TOE

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Ametek Specialty Metal Products Div release?
Ametek Specialty Metal Products Div has reported releases of 9 chemicals to the EPA Toxic Release Inventory, totaling 150.4K lbs. 5 of these (56%) are classified as carcinogens.
What industry is Ametek Specialty Metal Products Div in?
Ametek Specialty Metal Products Div is classified under the "Primary Metals" industry (NAICS code 331491), located in Wallingford, CT.
How long has Ametek Specialty Metal Products Div reported to the TRI?
Ametek Specialty Metal Products Div has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Ametek Specialty Metal Products Div release toxic chemicals?
The primary release pathway for Ametek Specialty Metal Products Div is air releases, accounting for 100.0% of total releases (150.4K lbs). Secondary pathway: water discharges (0.0%).
Are emissions from Ametek Specialty Metal Products Div increasing or decreasing?
From 2019 to 2023, total releases decreased by 29%, from 36.0K lbs to 25.5K lbs.
Is Ametek Specialty Metal Products Div a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Ametek Specialty Metal Products Div release carcinogens?
Yes, Ametek Specialty Metal Products Div reports 5 chemicals classified as carcinogens, representing 56% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Ametek Specialty Metal Products Div are rising or falling over time. View trends
  • This facility ranks #3,749 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Connecticut's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Connecticut profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Ametek Specialty Metal Products Div. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.