EPA TRI Facility · Fabricated Metals
Precision Custom Components LLC
York, PA
- Total releases
- 419 lbs
- Chemicals reported
- 3
- Carcinogens
- 1
- Primary pathway
- Off-site Transfers
OFFSITE Form-R mix
Precision Custom Components LLC: how the 8.1K lbs splits
8.1K lbs across all reported pathways
- Off-site Transfers 7.7K lbs 95.5%
- Air Releases 360 lbs 4.5%
Precision Custom Components LLC's 8.1K lbs Form-R total is OFFSITE - off-site transfers is 95.5% of the bar. Next segment: air releases at 4.5%. Leading chemical by pounds: Chromium.
Carcinogen-classified pounds vs other reported pounds
Same cumulative TRI total as above, split by EPA/IARC carcinogen classification on each chemical: pounds share, not chemical count. Classification is not a site health-risk score.
TRACE volume OFFSITE pathway CARC-MID
Precision Custom Components LLC is an EPA Toxics Release Inventory reporter in York, PA, in the fabricated metals sector. It reported 7.7K lbs of releases across 2 chemicals in 2024, and 419 lbs in total across its 2019-2024 reporting years. That ranks 15,021 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In Pennsylvania's 1,010 reporting TRI sites, pounds #1 is not chemical-count #1. Precision Custom Components LLC is pounds #740 and chemical-count #526 at 419 lbs. Max Environmental -- Yukon Facility leads reported pounds (34.8M lbs) at 18 chemicals (chemical-count #24). Keystone Cement Co leads chemical count at 53 chemicals (155.4K lbs, pounds #149). Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Dentsply Sirona; Johnson Controls Navy Systems LLC; Iwm - Wire Facility; Lehigh White Cement Co LLC. Similar-scale Fabricated Metals peers outside Pennsylvania: Valley Joist; Meaden Screw Products Co; Southco Inc. Honeoye Falls; Metalflow Corp. Largest disclosed chemicals by pounds: Chromium; Nickel; Manganese.
Precision Custom Components LLC stamps TRACE volume with a dominant OFFSITE pathway (95.5% off-site transfers) across 3 chemicals · 1 carcinogen-classified. Cumulative Form-R extract: 419 lbs (2019–2024). All figures are self-reported EPCRA §313 estimates, not measured stack emissions or a health-risk score. Scale peers include Valley Joist and Meaden Screw Products Co.
Precision Custom Components LLC vs. every reporting TRI facility
Cumulative reported release pounds, with this facility marked in the national distribution
419 lbs 42nd percentile higher than 42% of 25,986 reporting TRI facilities
Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.
Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year
Precision Custom Components LLC in the Fabricated Metals sector extract
Among the 3,421 Fabricated Metals facilities in this database, Precision Custom Components LLC reports the 1,931st-largest volume (419 lbs). Scale peers outside Pennsylvania include Valley Joist and Meaden Screw Products Co.
Sector rank uses reported TRI pounds only. Share callouts need ≥1,000 lbs so tiny totals cannot mint a false signal.
Precision Custom Components LLC Form-R facts
Compare this facility
See how Precision Custom Components LLC stacks up against nearby facilities and the typical reporter.
98% less than the comparison
50% more than the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Precision Custom Components LLC releases toxic chemicals into the environment. Total: 8.1K lbs.
Emissions Trend Summary
From 2019 to 2024, total releases increased by 4700% (160 lbs to 7.7K lbs).
Precision Custom Components LLC: annual Form-R pounds
TRACE site · OFFSITE pathway · TRI years 2019–2024
- 2019 0
- 2020 0
- 2021 0
- 2022 0
- 2023 0
- 2024 0
What this shows Precision Custom Components LLC year-over-year reported totals (increased by 4700% from 2019 to 2024). TRI figures are self-reported estimates and can swing with production, waste handling, and reporting changes, not only with controls. Lead chemical in the extract: Chromium.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 160 lbs | 3 |
| 2020 | 53 lbs | 2 |
| 2021 | 75 lbs | 2 |
| 2022 | 62 lbs | 2 |
| 2023 | 68 lbs | 2 |
| 2024 | 7.7K lbs | 2 |
Precision Custom Components LLC · OFFSITE-pathway site
Nearest TRI Facilities to Precision Custom Components LLC
Closest other reporters in Pennsylvania - including Dentsply Sirona, Johnson Controls Navy Systems LLC, Iwm - Wire Facility, ordered by distance.
Showing 8 of 1,009 other reporting facilities in Pennsylvania.
Similar Fabricated Metals Facilities
Other Fabricated Metals facilities with similar total release volumes (±80%), outside Pennsylvania - e.g. Valley Joist, Meaden Screw Products Co, Southco Inc. Honeoye Falls.
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
On this page the largest disclosed chemicals include Chromium, Nickel, Manganese; nearby reporters include Dentsply Sirona. Precision Custom Components LLC stamps TRACE volume · OFFSITE pathway · CARC-MID carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.
Use and verify this record
This Precision Custom Components LLC TRI extract (TRACE · OFFSITE · CARC-MID · lead Chromium) joins EPA Form-R filings with facility identity - reported pounds, not a health-risk rating.
Precision Custom Components LLC totals are self-reported EPCRA §313 estimates for York, PA, latest year 2023. Form-R rows span 2019–2024 (6 years). NAICS 332312 · Fabricated Metals. 0.0% of York TRI pounds in this extract. Nearest ABS peer: Dexter Axle (Δ 1 lbs). Pounds ≠ exposure.
Precision Custom Components LLC stamps TRACE volume · OFFSITE pathway · CARC-MID · lead Chromium. PlainEnviro renders this EPA Form-R extract from its pipeline; no figure is typed in by an editor. Corrections: editorial policy.
All federal data sources used on this page
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
- EPA Facility Registry Service - facility location and identity. epa.gov
- EPA ECHO - regulatory and compliance context. epa.gov
- EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov