EPA TRI Facility · Petroleum

Phillips 66 Selmer Lubricants Plant

Selmer, TN · Parent: Phillips 66

Total releases
742 lbs
Chemicals reported
2
Latest report
2023
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Phillips 66 Selmer Lubricants Plant has reported 742 lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. The facility operates in the Petroleum sector. The primary release pathway is off-site transfers, accounting for 80% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#14,287 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Phillips 66 Selmer Lubricants Plant files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 324191 (Petroleum). Across 5 years of records spanning 2019–2023, the site has disclosed 742 lbs in cumulative toxic releases across 2 distinct chemicals.

The dominant release pathway is off-site transfers at 593 lbs (79.9% of total volume), followed by water discharges at 18.5%. Between 2019 and 2023, reported totals decreased by 23% - from 48 lbs to 37 lbs. The facility is operated under parent company Phillips 66.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Phillips 66 Selmer Lubricants Plant has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Petroleum
NAICS Code
324191
Total Releases
742 lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how Phillips 66 Selmer Lubricants Plant stacks up against nearby facilities and the typical reporter.

Total reported releases
Phillips 66 Selmer Lubricants Plant
742 lbs
Nyrstar Clarksville Inc
72.9M lbs

100% less than the comparison

Chemicals reported
Phillips 66 Selmer Lubricants Plant
2
Nyrstar Clarksville Inc
13

85% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Phillips 66 Selmer Lubricants Plant releases toxic chemicals into the environment. Total: 742 lbs.

Off-site Transfers 593 lbs (79.9%)
Water Discharges 137 lbs (18.5%)
Air Releases 12 lbs (1.6%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 23% (48 lbs to 37 lbs).

Reported total releases by year

Phillips 66 Selmer Lubricants Plant - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 48 lbs 2
2020 83 lbs 2
2021 472 lbs 2
2022 102 lbs 2
2023 37 lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). Sorted by total release volume.

Chemical Total Flags
Zinc compounds 742 lbs -
Certain glycol ethers 0 lbs -

Location

Coordinates
35.1549, -88.5960
ZIP Code
38375
EPA Facility ID
3837WPHLLP5INDU

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Phillips 66 Selmer Lubricants Plant release?
Phillips 66 Selmer Lubricants Plant has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 742 lbs.
What industry is Phillips 66 Selmer Lubricants Plant in?
Phillips 66 Selmer Lubricants Plant is classified under the "Petroleum" industry (NAICS code 324191), located in Selmer, TN.
How long has Phillips 66 Selmer Lubricants Plant reported to the TRI?
Phillips 66 Selmer Lubricants Plant has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Phillips 66 Selmer Lubricants Plant release toxic chemicals?
The primary release pathway for Phillips 66 Selmer Lubricants Plant is off-site transfers, accounting for 79.9% of total releases (593 lbs). Secondary pathway: water discharges (18.5%).
Are emissions from Phillips 66 Selmer Lubricants Plant increasing or decreasing?
From 2019 to 2023, total releases decreased by 23%, from 48 lbs to 37 lbs.
Is Phillips 66 Selmer Lubricants Plant a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Phillips 66 Selmer Lubricants Plant are rising or falling over time. View trends
  • This facility ranks #14,287 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Tennessee's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Tennessee profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Phillips 66 Selmer Lubricants Plant. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.