EPA TRI Facility · Primary Metals

Western Extrusions Corp

Carrollton, TX · Parent: Westext

Total releases
563.5K lbs
Chemicals reported
13
Carcinogens
3
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Western Extrusions Corp has reported 563.5K lbs of toxic releases across 13 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 3 are classified as carcinogens, representing 23% of the facility's chemical profile. The facility operates in the Primary Metals sector. The primary release pathway is off-site transfers, accounting for 71% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#1,809 of 25,902 TRI facilities nationwide by total reported releases - among the top 7% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk.

Western Extrusions Corp files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331318 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 563.5K lbs in cumulative toxic releases across 13 distinct chemicals, 3 of which (23%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 402.5K lbs (71.4% of total volume), followed by air releases at 27.9%. Between 2019 and 2023, reported totals decreased by 44% - from 139.1K lbs to 77.5K lbs. The facility is operated under parent company Westext.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Western Extrusions Corp has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331318
Total Releases
563.5K lbs
Chemicals Reported
13
Latest Report Year
2023

Compare this facility

See how Western Extrusions Corp stacks up against nearby facilities and the typical reporter.

Total reported releases
Western Extrusions Corp
563.5K lbs
Ascend Performance Materials-Chocolate Bayou Plant
94.0M lbs

99% less than the comparison

Chemicals reported
Western Extrusions Corp
13
Ascend Performance Materials-Chocolate Bayou Plant
36

64% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Western Extrusions Corp releases toxic chemicals into the environment. Total: 563.5K lbs.

Off-site Transfers 402.5K lbs (71.4%)
Air Releases 157.4K lbs (27.9%)
Water Discharges 3.6K lbs (0.6%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 44% (139.1K lbs to 77.5K lbs).

Reported total releases by year

Western Extrusions Corp - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 139.1K lbs 13
2020 120.8K lbs 11
2021 130.4K lbs 10
2022 95.9K lbs 10
2023 77.5K lbs 10

Chemical Releases

Aggregated across all reporting years (2019–2023). 3 of 13 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 288.2K lbs -
Xylene (mixed isomers) 110.1K lbs -
Aluminum (fume or dust) 67.0K lbs -
Certain glycol ethers 34.7K lbs -
Toluene 25.7K lbs -
Dimethyl phthalate 15.3K lbs -
Ethylbenzene 13.3K lbs Carcinogen
Ammonia 6.0K lbs -
1,2,4-Trimethylbenzene 2.1K lbs -
Naphthalene 1.0K lbs Carcinogen
Lead 51 lbs Carcinogen
Nitric acid 0 lbs -
Diisocyanates 0 lbs -

Location

Coordinates
32.9685, -96.9213
ZIP Code
75006
EPA Facility ID
75006WSTRN1735S

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Western Extrusions Corp release?
Western Extrusions Corp has reported releases of 13 chemicals to the EPA Toxic Release Inventory, totaling 563.5K lbs. 3 of these (23%) are classified as carcinogens.
What industry is Western Extrusions Corp in?
Western Extrusions Corp is classified under the "Primary Metals" industry (NAICS code 331318), located in Carrollton, TX.
How long has Western Extrusions Corp reported to the TRI?
Western Extrusions Corp has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Western Extrusions Corp release toxic chemicals?
The primary release pathway for Western Extrusions Corp is off-site transfers, accounting for 71.4% of total releases (402.5K lbs). Secondary pathway: air releases (27.9%).
Are emissions from Western Extrusions Corp increasing or decreasing?
From 2019 to 2023, total releases decreased by 44%, from 139.1K lbs to 77.5K lbs.
Is Western Extrusions Corp a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Western Extrusions Corp release carcinogens?
Yes, Western Extrusions Corp reports 3 chemicals classified as carcinogens, representing 23% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Western Extrusions Corp are rising or falling over time. View trends
  • This facility ranks #1,809 of 25,902 TRI facilities nationwide by total reported releases - among the top 7% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Texas's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Texas profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Western Extrusions Corp. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.